AGP4x 8x graphics card can be changed to the right
Users questions: Master with optimized display is independent of the existing 32 MB memory you say very sensible
Experts answer: upstairs, 8X, 4X, 2X is a 2-fold relationship, that is, the transmission is 4X 8X 2 times, and so on. However, the actual transfer rate is difficult to achieve even 4X, so if your card is not Special high-end, then, 8X and 4X is no much difference. For your question Louzhu disappointed not to play, you encounter this problem I have, but have been resolved. My motherboard is the 694X chip, agp maximum support 4X, graphics are gf4mx4000AGP8X. At first I just plug in card, the system displays the 2X, despite the graphics card is better than the previous piece, but not smooth, CS often appear when the screen is not coherent. Solution: 1, first open the motherboard cmos in AGP4X option 2, Download VIA4-in-1 driver 4.31 that Can be (re-high version of the support AGP3.0's on your motherboard has no real meaning). 3, after installation 4-in-1 after the next series with the following instructions in Notepad, saved as agp4.reg (course name to whatever you name a good), and run added to the registry REGED IT4 [HKEY_LOCAL_MACHINE * Software * NVIDIACorporation * Global * System] "EnableVia4X" = dword: 00000001 restart to see if the system shows Is AGP4X. Their feelings about the difference between 4X and 2X bar. Your video card 4X and 8X is no much difference of:) answer questions on the evaluation were: Thank you for your friendship tips, although not without success, may be the specific hardware and software environment is not the same as it (the same chipset 6 94). But your idea is very general, I will continue to test this idea go. If you find any better way to share what might. Bless you and your dolphins:)