AMDAthlonIIX3425 overclocking problem
[Users questions | Browse:65 | Favorites]
Users questions: For the AMD platform, AMDAthlonIIX3425 this the default CPU clock speed is 2.7G, now transferred to the FSB 240,3.24 G to use. You can run super_pi1M to 25 seconds, a lot of speed than the original. Temporary use of a fairly normal, like trying to drive In this sub-frequency long-term use? I do not know Daoxing No, the motherboard is Onda Maken A790GX + (V2.0 times the firm) which should be very fast good overclocking motherboard, it should be very stable. But I do not know where the memory Daoxing not doubt, is composed of two 2G of Kingston DDR21G to use a Article 800, one is 667. The beginning is to use a piece of memory to use a 1G800, and then only super super how to 2.9G or so to use, no matter how high it will reboot, can not be switched in the system under ultra-sometimes the video. Because of this on-board HD3300 graphics chip, Share a lot of machine memory. Onto the machine a lot slower, had 1G of memory is not enough for the WIN7. Then go out and buy a second-hand section of memory 100 Kingston 1G667 quick money, come back after installed, the default memory frequency drop. Down to 667, but do not know if this fight wrong wrong Collision, since the CPU overclocking good over much, what other things do not need much to set it casually over to the 3.24G, I believe can be high, but I do not know fear so long to use Daoxing not. There is, as already there is one memory 667, CPU overclocked to 3.24G, the memory frequency is just Good to 800. Memory 800 from 667 over the arrival of the long-term use, there will be problems? In addition one should not be a problem of it, has always been 800. Online said overclocking methods, mostly front-side bus down and then take over, which is U FSB 2000MHZ. Motherboard support the highest Who seems to 2600MHZ, ultra FSB to 240, the front end to 2400MHZ, do not know to use ultra-high front-side bus will not be a problem. Later, the front-side bus down to 1600MHZ, to super, just super to 240, it was time 2000MHZ, but in fact there Not to fall, so catch it high, the speed of the machine will improve it? Long-term to use, there will be problems? North Bridge, where there is,, CPU FSB transferred to 240, the Northbridge clock frequency to 240 followed, this phenomenon be considered normal? If not normal, where you can drop the clock frequency northbridge Back to 200. Not afraid to use it to drop it? There is also a more concerns, with the power of this power is a long time ago, or 20-pin connector of the power, as the number of watts, since a long time ago to buy, does not know, the stickers are missing on the power supply . What brand, what time of Plants do not know. This power could have been used with NF4 motherboards AM2X24200 + U-super to 2.9G, GF8600GT graphics card, so used to come and are all right. Unplug power to the drive, and dragged the 95W power consumption of the CPU and motherboard, hard drive and a serial , Is a motherboard integrated graphics chip, but the U over the 240 FSB, full power will be high when a lot of it. Is there a system, the machine can detect up to now is how many watts electricity, but also how many watts is useless rise, power consumption is the number of the software. There is no power in the system is to detect how many watts software . Yes, I can introduce you to a few? Talk about the software name? A friend give me some advice? Plan for a long time to use this frequency in 3.24G., CPU time in this frequency. Memory from 667-800, North Bridge chips rose 240, so long right? Also Power there, there are ways you can detect machine draw power in the system now is how many watts it? Hope you can master, helper answer? ?
Experts answer: back to Intel you will feel surprisingly quick SuperPI
Experts answer: back to Intel you will feel surprisingly quick SuperPI
- I want to upgrade next computer, playing modern air combat?
- Watching high-definition video settings problem
- Point does not light up
- Hardware problem! ! ! ! ! Urgent! ! ! ! ! ! ! ! I am online, etc.! ! ! !
- Jetway P43 or not to support VT is
- My computer automatically restarts and blue screen
- NVIDIAGeForce8400SE (521 megabytes)
- This line is inserted where?
- Ask for advice: run four or five minutes after the computer automatically shut down
- Tongfang love C2650-X002
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.