Burner does not come out playing
[Users questions | Browse:51 | Favorites]
Users questions: My burner is snoy, and spent about six months, and now burning - automatically pop up doors - she played it several times their shells do not come out, then manually, by several times, was out; If you put a blank disc, does fit pop up, please expert guidance!
Experts answer: if stuck can not play the CD-ROM Out of the situation, the internal parts may be contact between the drive problems, you can try the following methods to solve: the drive from the chassis using the Phillips screwdriver to remove and take apart the emergency eject hole through the tray pop-up drive, so you can unload cover and drive off the front cover. Removing the cover will see the CD-ROM drive Movement, the tray will be a left or right end of the belt attached to the tray motor. You can check the belt is clean, whether there is dislocation, but also can be connected to this belt and the end of the motor oil. Another CD-ROM tray on both sides have a row of teeth, the teeth is to control the tray pop-up and retracted. Please give this sawtooth oil and see if it is not the fault dislocation of the class. If you set on the oil wipe excess oil, and then re-installed the drive, and finally turn it a try. Reminder: Because this service more professional, however, suggest that you find the best professional repair.
Experts answer: if stuck can not play the CD-ROM Out of the situation, the internal parts may be contact between the drive problems, you can try the following methods to solve: the drive from the chassis using the Phillips screwdriver to remove and take apart the emergency eject hole through the tray pop-up drive, so you can unload cover and drive off the front cover. Removing the cover will see the CD-ROM drive Movement, the tray will be a left or right end of the belt attached to the tray motor. You can check the belt is clean, whether there is dislocation, but also can be connected to this belt and the end of the motor oil. Another CD-ROM tray on both sides have a row of teeth, the teeth is to control the tray pop-up and retracted. Please give this sawtooth oil and see if it is not the fault dislocation of the class. If you set on the oil wipe excess oil, and then re-installed the drive, and finally turn it a try. Reminder: Because this service more professional, however, suggest that you find the best professional repair.
- I want to upgrade next computer, playing modern air combat?
- Watching high-definition video settings problem
- Point does not light up
- Hardware problem! ! ! ! ! Urgent! ! ! ! ! ! ! ! I am online, etc.! ! ! !
- Jetway P43 or not to support VT is
- My computer automatically restarts and blue screen
- NVIDIAGeForce8400SE (521 megabytes)
- This line is inserted where?
- Ask for advice: run four or five minutes after the computer automatically shut down
- Tongfang love C2650-X002
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.