CPU than the Pentium Pentium 2.8R of the 2.4R please?
[Users questions | Browse:41 | Favorites]
Users questions:I recently replaced one another CPU, I had the Pentium2.4r change of his Pentium2.8r. Computer properties where past shows pentium (R) 4cpu2.4GHz2.39GHz, 256MB of RAM now shows the pentium (R) 4cpu2.8GHz1.39GHz, 256MB, I would like to ask why the show only 1.39GHz instead of 2.79, or 2.8? Cpu performance is now worse than before?
Experts answer: actual working frequency is only half the nominal value of. 1, after restart it still shows such a situation, the hardware replacement after a period of time may be the case. 2, if used multiple times were the case, check it two CPU's front side bus are the same. 3, if the front-side bus line, then check your motherboard supports CPU frequency is the highestHow many, if not reach 2.8G, the motherboard CPU down screen may be used. 4, if the 2.8GCPU than 2.4GCPU front-side bus front-side bus, you should be the board's current settings 2.8GCPU bus do not match. Into the CMOS, to see if the front can boardBus set to match with the CPU. Note: The front-side bus is usually 400MHz, 533MHz, is also possible for the 100MHz, 133MHz. You can use Windows optimization software such as master to see. If the CPU front side bus is not very familiar with the concept, it is recommended to find pairs ofThis is an understanding of knowledge people to help check. Good luck:)
Experts answer: actual working frequency is only half the nominal value of. 1, after restart it still shows such a situation, the hardware replacement after a period of time may be the case. 2, if used multiple times were the case, check it two CPU's front side bus are the same. 3, if the front-side bus line, then check your motherboard supports CPU frequency is the highestHow many, if not reach 2.8G, the motherboard CPU down screen may be used. 4, if the 2.8GCPU than 2.4GCPU front-side bus front-side bus, you should be the board's current settings 2.8GCPU bus do not match. Into the CMOS, to see if the front can boardBus set to match with the CPU. Note: The front-side bus is usually 400MHz, 533MHz, is also possible for the 100MHz, 133MHz. You can use Windows optimization software such as master to see. If the CPU front side bus is not very familiar with the concept, it is recommended to find pairs ofThis is an understanding of knowledge people to help check. Good luck:)
- How to configure the video card, so I am online
- Notebook keyboard with that key to restart the computer
- Memory burn you look what happens
- Today, how to buy A-DATA memory a computer will not start
- Laser mouse problem!
- Want to buy a motherboard tray out of the chassis can
- My motherboard for the memory it
- Is there knowledge of friends help me see it too how the host of the price and performance
- Take up too much computer memory?
- Download the new upgrade card driver, do not know what the path to the installation
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.