Collapse
[Users questions | Browse:45 | Favorites]
Users questions:I have an old computer, 5 years ago, and now idle. But sometimes need to use. The day before yesterday the whole a bit chaotic computer results system close to collapse. My old computer is WINDOWSME. ME now want to delete the replaced XP or 2000, do not know how to get, you teach me!
Experts answer: as long as your machine is equipped with 64 memory can be installed in 2000. Install specific ways: 1) boot or restart press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4)Using the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' key after the carriage return, Restart the computer to note that due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. 1): Set the optical drive first, rebootMachine, select the CD-ROM into the installation after the carriage return. 2): screen appears PressanykeytobootfromCD "immediately after the carriage return. 3): start copying files, installing and testing the previous version, and enter the next step. 4): choose to install the system disk directory. 5): Select the formatting, 2000, the system is not a quick format, or only NTFS and FAT, as well as "no change" approach. Recommended to use NTFS. 6): formatting has been completed, start the installation program starts copying files, this process needs about 10 minutes, 7): Copy paperPiece is completed, load information, automatically restart after 15 seconds without intervention. 8): After rebooting, later into the Setup Wizard, click "Next", the installation program detects and install the equipment. This process needs a few minutes, and the screen will flash a few seconds. 9): Click "Next", enter the nameAnd registered unit name. Click three times "Next." , We began to install the network settings, copy the files to install network components, this process needs about 10 minutes time, does not operate, be patient. 10): complete click "Finish." Automatically restart. 11): After rebooting, click "Next" "NextStep. "2000 system you're done! Yesterday uploaded 2000 and XP graphical installation method, you can click on my name, see my blog, log on to see detailed diagrams If CD-ROM drive, CD-ROM into the drive before the drive 1 ) Right 'My Computer' and select 'Properties '2) Select'Hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'Yes, only this time' and click 'Next' and then select 'Automatic search for installed' and click 'Next' * 6) to start automatically search install the appropriate drivers, such as after closingFruit is to use a backup CD or already know which driver is the appropriate device driver, you can reverse installation: 2000 System Driver Installation reverse: 1): Right My Computer, Properties, Hardware, Device Manager, open the. 2): Double-click the yellow question mark devices. 3): Click "Next. "4): check the" search for the driver for my device (recommended) (S) "(usually the default). 5): Click" Next. "6): Check the" Specify a location " and to abolish the "floppy disk drive" and "CD-ROM drive" in front of the hook, click "Next." 7): Click the "Browse", click "My Computer", open the saved driver disk directory, find the appropriate driver. Click "Open." 8): Click "OK." Click "Next" is starting to install: 9): complete, closed. screen.width * 0.35) this.width=screen.width*0.40 *
Experts answer: as long as your machine is equipped with 64 memory can be installed in 2000. Install specific ways: 1) boot or restart press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4)Using the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' key after the carriage return, Restart the computer to note that due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. 1): Set the optical drive first, rebootMachine, select the CD-ROM into the installation after the carriage return. 2): screen appears PressanykeytobootfromCD "immediately after the carriage return. 3): start copying files, installing and testing the previous version, and enter the next step. 4): choose to install the system disk directory. 5): Select the formatting, 2000, the system is not a quick format, or only NTFS and FAT, as well as "no change" approach. Recommended to use NTFS. 6): formatting has been completed, start the installation program starts copying files, this process needs about 10 minutes, 7): Copy paperPiece is completed, load information, automatically restart after 15 seconds without intervention. 8): After rebooting, later into the Setup Wizard, click "Next", the installation program detects and install the equipment. This process needs a few minutes, and the screen will flash a few seconds. 9): Click "Next", enter the nameAnd registered unit name. Click three times "Next." , We began to install the network settings, copy the files to install network components, this process needs about 10 minutes time, does not operate, be patient. 10): complete click "Finish." Automatically restart. 11): After rebooting, click "Next" "NextStep. "2000 system you're done! Yesterday uploaded 2000 and XP graphical installation method, you can click on my name, see my blog, log on to see detailed diagrams If CD-ROM drive, CD-ROM into the drive before the drive 1 ) Right 'My Computer' and select 'Properties '2) Select'Hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'Yes, only this time' and click 'Next' and then select 'Automatic search for installed' and click 'Next' * 6) to start automatically search install the appropriate drivers, such as after closingFruit is to use a backup CD or already know which driver is the appropriate device driver, you can reverse installation: 2000 System Driver Installation reverse: 1): Right My Computer, Properties, Hardware, Device Manager, open the. 2): Double-click the yellow question mark devices. 3): Click "Next. "4): check the" search for the driver for my device (recommended) (S) "(usually the default). 5): Click" Next. "6): Check the" Specify a location " and to abolish the "floppy disk drive" and "CD-ROM drive" in front of the hook, click "Next." 7): Click the "Browse", click "My Computer", open the saved driver disk directory, find the appropriate driver. Click "Open." 8): Click "OK." Click "Next" is starting to install: 9): complete, closed. screen.width * 0.35) this.width=screen.width*0.40 *
- What are the features the computer network?
- Describes the basic components of computer work
- How to determine your computer does not svchost trojan, how to delete
- Script virus malicious Web site how to do?
- Does the computer have universal health drive
- Fn key on a laptop how to use what is useful
- Help: This is a computer problem, how to repair?
- How to identify computer hardware is good or bad
- How to set double click to open shortcut icon?
- Internet system for personal use to restore it?
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.