Computer blue screen and abnormal ask!
[Users questions | Browse:35 | Favorites]
Users questions: Computer blue screen phenomenon began to appear last week: the circumstances are as follows 1, the blue screen code stop: 0x000000f40x000000030x82254800, 0x82254974.0x805FC09E) 2, running for some time, occasionally some noise * CPU fan looks like a fixed steel bars outside the sound card, (usually there will be sound when the computer running the program or wait for a while being stuck on blue screen) 3, pull down the old memory cleared up the problem by still another point, Shut down the computer monitor off after about 10 seconds the host actually stop running.
Experts answer:WINDOWSXP or improper operation of the system when the system crashes will automatically restart, restart the system for blue screen is the wrong place for reason and explanation, then the system will automatically run the CHECK tool to fix these problems, so this problem without special treatment, only need Attention to the recovery operation after the computer can be a blue screen, the possibility of both software and hardware, and not just caused by bad sectors hard disk. Software, you can use the latest antivirus software to scan for viruses, if you recently installed a new version of the driver, restored to the original version using the normal The problem is not resolved, you can reinstall the system. Hardware, if you are overclocking, then the first hardware to restore the default frequency; then check whether there is heat, because heat will cause the hardware to read and data transmission errors; next step is to check with the substitution which parts of the problem, One of the suspects is the memory Maximum. Prevent computer blue screen should note the following: on a regular basis is important for manual backup of the registry files; to avoid non-normal shutdown, reducing the loss of important documents; for ordinary users, as long as normal operation, do not upgrade the graphics card, motherboard BIOS and driver; regular inspection optimization System files, run "System File Checker" for the file is missing check and proofread version. Solution: (1) using the Windows installation CD to repair the installation; (2) If you can enter safe mode, ** "Start ** run **": sfc * scannow (3) can also be used to extract file method to solve, enter ** "** Recovery Console", copy or use the expand command to copy or extract from the CD damaged file, but drivers are generally blue screen documentation, it will use the expand command are some of the Such as: blue screen prompted tdi.sys file, because the driver files are generally compressed in the i386 ** driver package, so use: expand% CDROM: ** i386 ** driver.cab ** f: tdi.sysc: ** winn t ** system ** drivers. (xp to expand% CDROM: ** i386 ** driver.cab ** f: tdi.sysc: ** windowns ** system ** drivers) If you start If you have such a blue screen stop code blue screen when Windows starts, and the emergence of Schedule I of the error message, then when most of the hardware problems, please use the hardware manufacturers to provide hardware diagnostic tools to determine if there are problems, and to its website see if the latest BIOS or firmware update Program if the hardware is not the problem, reinstall Windows2K * XP, if there is still the same problem, it can only help the professional technical support. If you encounter an error when the information in Schedule II, only to reinstall Windows, and if not solve the problem, the proposed professional technical support for help Hold .1. Troubleshooting information *** STOP0x0000001E (0xC0000005, 0xFDE38AF9, 0x0000001, 0x7E8B0EB4) KMODE_EXCEPTION_NOT_HANDLED ** * The first part of which is the stop error code (StopCode) is STOP0x0000001E, used to identify the type of error has occurred, the error is the second part of the brackets of the set of four numbers, indicating a random developer-defined parameters (this parameters for the average user Simply can not understand, only the driver writer or Microsoft operating system developers can understand) the third part is the wrong name is usually the first line of information used to identify the product or device driver error. Most of the information is very simple, but stop code can be used as the search term in the Microsoft Knowledge Base and other technical resources
Experts answer:WINDOWSXP or improper operation of the system when the system crashes will automatically restart, restart the system for blue screen is the wrong place for reason and explanation, then the system will automatically run the CHECK tool to fix these problems, so this problem without special treatment, only need Attention to the recovery operation after the computer can be a blue screen, the possibility of both software and hardware, and not just caused by bad sectors hard disk. Software, you can use the latest antivirus software to scan for viruses, if you recently installed a new version of the driver, restored to the original version using the normal The problem is not resolved, you can reinstall the system. Hardware, if you are overclocking, then the first hardware to restore the default frequency; then check whether there is heat, because heat will cause the hardware to read and data transmission errors; next step is to check with the substitution which parts of the problem, One of the suspects is the memory Maximum. Prevent computer blue screen should note the following: on a regular basis is important for manual backup of the registry files; to avoid non-normal shutdown, reducing the loss of important documents; for ordinary users, as long as normal operation, do not upgrade the graphics card, motherboard BIOS and driver; regular inspection optimization System files, run "System File Checker" for the file is missing check and proofread version. Solution: (1) using the Windows installation CD to repair the installation; (2) If you can enter safe mode, ** "Start ** run **": sfc * scannow (3) can also be used to extract file method to solve, enter ** "** Recovery Console", copy or use the expand command to copy or extract from the CD damaged file, but drivers are generally blue screen documentation, it will use the expand command are some of the Such as: blue screen prompted tdi.sys file, because the driver files are generally compressed in the i386 ** driver package, so use: expand% CDROM: ** i386 ** driver.cab ** f: tdi.sysc: ** winn t ** system ** drivers. (xp to expand% CDROM: ** i386 ** driver.cab ** f: tdi.sysc: ** windowns ** system ** drivers) If you start If you have such a blue screen stop code blue screen when Windows starts, and the emergence of Schedule I of the error message, then when most of the hardware problems, please use the hardware manufacturers to provide hardware diagnostic tools to determine if there are problems, and to its website see if the latest BIOS or firmware update Program if the hardware is not the problem, reinstall Windows2K * XP, if there is still the same problem, it can only help the professional technical support. If you encounter an error when the information in Schedule II, only to reinstall Windows, and if not solve the problem, the proposed professional technical support for help Hold .1. Troubleshooting information *** STOP0x0000001E (0xC0000005, 0xFDE38AF9, 0x0000001, 0x7E8B0EB4) KMODE_EXCEPTION_NOT_HANDLED ** * The first part of which is the stop error code (StopCode) is STOP0x0000001E, used to identify the type of error has occurred, the error is the second part of the brackets of the set of four numbers, indicating a random developer-defined parameters (this parameters for the average user Simply can not understand, only the driver writer or Microsoft operating system developers can understand) the third part is the wrong name is usually the first line of information used to identify the product or device driver error. Most of the information is very simple, but stop code can be used as the search term in the Microsoft Knowledge Base and other technical resources
- I want to upgrade next computer, playing modern air combat?
- Watching high-definition video settings problem
- Point does not light up
- Hardware problem! ! ! ! ! Urgent! ! ! ! ! ! ! ! I am online, etc.! ! ! !
- Jetway P43 or not to support VT is
- My computer automatically restarts and blue screen
- NVIDIAGeForce8400SE (521 megabytes)
- This line is inserted where?
- Ask for advice: run four or five minutes after the computer automatically shut down
- Tongfang love C2650-X002
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.