Connect the power, not by the host at the beginning, the computer will boot up itself
[Users questions | Browse:32 | Favorites]
Users questions:Connect the power, not by the host at the beginning, the computer boot on their own, and this is why? Host of "hot start button" does not work
Experts answer: for your computer, a situation may be set up, you still might so that the chassis power supply problems. First, modify the BIOS settings for BIOS in some settings can cause these problems. In the "INTEGRATEDPHRIPHERALSSETUP", there is a "PWRONAfterPWR-Fail" setting in the management of this function. The options are three, namely, "On (Boot)""Off (off)" and "Former-Sts (power restored to the pre-state)." You should set it to "Off". In this way the power switch or power failure, etc. after the sudden call, the computer does not automatically started. If the above method does not work, can continue to try the followingReview: the BIOS in "POWERMANAGENTSETUP" the "Restoreacpowerloss" set to "Disabled". The BIOS in the "POWERMANAGENTSETUP" the "PMControlbyAPM "set to" Yes ". Note that the individual is different BIOS versions, please refer to the specific motherboard manual. Second, the chassis power supply problems, the best-for-one, get this injury machine is several times the. chassis power supply is divided into ATX and AT are two types of motherboards are the current use of computersATX's. All things have pros and cons, even the advanced technology. ATX power supply gives us a soft shutdown, automatically receive E-mail * fax, regular boot and so convenient, but also to the introduction of a destabilizing factor computers, such as air conditioners, refrigerators and so on lead to start the automatic boot failure. ATX structure becausePower On is by detection of a capacitance level signals to drive, and in the press the power switch when the outlet, plug in case power plug, etc., will have a short-term impact of current. This ATX power supply can easily lead to malfunction, the machine starts. Therefore, on the one hand we have to set up BIOS, on the other hand, we should try to use a separate computer socket, in order to avoid interference from other electrical appliances. In addition, ATX power supply is to let the computer is always ready to boot. Power consumption is very low at this time, no need to turn off the power socket. Because it will affect the display switches at least the life span. ATX main features is to use "+5 VSB, PO-ON" combination to achieve the power of opening and closing, as long as you can control the PO-ON signal level changes, you can control the power of opening and closing. PO-ON is less than 1 volt power supply is turned on, more than 4.5 V, turn off the power.
Experts answer: for your computer, a situation may be set up, you still might so that the chassis power supply problems. First, modify the BIOS settings for BIOS in some settings can cause these problems. In the "INTEGRATEDPHRIPHERALSSETUP", there is a "PWRONAfterPWR-Fail" setting in the management of this function. The options are three, namely, "On (Boot)""Off (off)" and "Former-Sts (power restored to the pre-state)." You should set it to "Off". In this way the power switch or power failure, etc. after the sudden call, the computer does not automatically started. If the above method does not work, can continue to try the followingReview: the BIOS in "POWERMANAGENTSETUP" the "Restoreacpowerloss" set to "Disabled". The BIOS in the "POWERMANAGENTSETUP" the "PMControlbyAPM "set to" Yes ". Note that the individual is different BIOS versions, please refer to the specific motherboard manual. Second, the chassis power supply problems, the best-for-one, get this injury machine is several times the. chassis power supply is divided into ATX and AT are two types of motherboards are the current use of computersATX's. All things have pros and cons, even the advanced technology. ATX power supply gives us a soft shutdown, automatically receive E-mail * fax, regular boot and so convenient, but also to the introduction of a destabilizing factor computers, such as air conditioners, refrigerators and so on lead to start the automatic boot failure. ATX structure becausePower On is by detection of a capacitance level signals to drive, and in the press the power switch when the outlet, plug in case power plug, etc., will have a short-term impact of current. This ATX power supply can easily lead to malfunction, the machine starts. Therefore, on the one hand we have to set up BIOS, on the other hand, we should try to use a separate computer socket, in order to avoid interference from other electrical appliances. In addition, ATX power supply is to let the computer is always ready to boot. Power consumption is very low at this time, no need to turn off the power socket. Because it will affect the display switches at least the life span. ATX main features is to use "+5 VSB, PO-ON" combination to achieve the power of opening and closing, as long as you can control the PO-ON signal level changes, you can control the power of opening and closing. PO-ON is less than 1 volt power supply is turned on, more than 4.5 V, turn off the power.
- Computer does not shine like the power cord for jack
- Help computer professionals, on the quad-core laptop
- For a black screen after the computer memory
- Ling Yue 2 Z guide of savage life, highlights what is
- Winter boot a computer, why buzzing, the sound after a while?
- Mobile hard drive into the open after the show "I * O device error, can not be opened."
- 9600GT graphics card help! ! ! !
- gt240 out MAXSUN of only 599 yuan to buy! How??
- Recommended section playing Call of Duty 6 mainstream graphics card
- Which standalone DVD burner cost-effective?
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.