Connect two computers simultaneously on the issue of access?
[Users questions | Browse:34 | Favorites]
Users questions:I now have a desktop and notebook two computers, a platform with network and a network card, but do not want to switch router to use what, this situation can also wants Tamen Internet, and pay the original telecommunications Haishi so many money, how should I do? Please master, said details, I was rookie. more more moreGood, good, I will add points, thank you!
Experts answer: upstairs to say is very true, but the more detailed your request, so let me talk. Achieved using three network cards on both machines at the same time setting method of broadband: Hardware: Host (on your desktop with the original board should be integrated with one, and buy a piece of equipment on20 yuan or so) installed two network cards. From the machine (your laptop) with a network card. (It should be there own) pinched a common network line "result of" cross-connect, you sell the wire to say, say is a direct link two computers with the kind of line cards are generally known! In both cases, if your ADSL is USB interface, you must use software like sygate shared, this will not speak of another situation, if your RJ45 interface (basically all of this is the LAN interface) said the following circumstances , how to set one to determine the host, from the machine, carry a card and install a good drive, installedAfter a good host you will see the existence of two "local connection" Second, will host two local connections to rename, respectively, to better remember the name "broadband" and "LAN." "Broadband" cable and ADSL network card cat connection (the wire is the original desktop Flanagan used the Internet, connection is a "parallel", Not "cross", do not confused). "LAN" network card cable (cross) and from the machine (laptop) to connect! Third, the host above the new ADSL dial-up connection. For the convenience, be called "broadband connection." 4, right-click "broadband connection," select "Advanced" select "sharing" select sharing, willAllows you to select which network card as the LAN card, select "LAN" OK, the system will named "LAN" network card IP is automatically set to 192.168.0.1 (to use the automatic settings, no change) 5, from a machine (laptop) settings. Right-click the "local connection", "property"IP address setting: 192.168.0.xx 2 to 255 (their choice), such as: 66 Note: X can not be set to 1. Gateway, DNS 2 are set to 192.168.0.1 subnet mask, and host the same set, the default is 255.255.255.0 gateway mustIs the host IP, DNS if you set the host IP, if not the words of the Internet. To set the same DNS server and host! (This small,) (host dial-up, you can by IPCONFIG * ALL command to see the DNS server addresses, the Internet may not be the same each time)
Experts answer: upstairs to say is very true, but the more detailed your request, so let me talk. Achieved using three network cards on both machines at the same time setting method of broadband: Hardware: Host (on your desktop with the original board should be integrated with one, and buy a piece of equipment on20 yuan or so) installed two network cards. From the machine (your laptop) with a network card. (It should be there own) pinched a common network line "result of" cross-connect, you sell the wire to say, say is a direct link two computers with the kind of line cards are generally known! In both cases, if your ADSL is USB interface, you must use software like sygate shared, this will not speak of another situation, if your RJ45 interface (basically all of this is the LAN interface) said the following circumstances , how to set one to determine the host, from the machine, carry a card and install a good drive, installedAfter a good host you will see the existence of two "local connection" Second, will host two local connections to rename, respectively, to better remember the name "broadband" and "LAN." "Broadband" cable and ADSL network card cat connection (the wire is the original desktop Flanagan used the Internet, connection is a "parallel", Not "cross", do not confused). "LAN" network card cable (cross) and from the machine (laptop) to connect! Third, the host above the new ADSL dial-up connection. For the convenience, be called "broadband connection." 4, right-click "broadband connection," select "Advanced" select "sharing" select sharing, willAllows you to select which network card as the LAN card, select "LAN" OK, the system will named "LAN" network card IP is automatically set to 192.168.0.1 (to use the automatic settings, no change) 5, from a machine (laptop) settings. Right-click the "local connection", "property"IP address setting: 192.168.0.xx 2 to 255 (their choice), such as: 66 Note: X can not be set to 1. Gateway, DNS 2 are set to 192.168.0.1 subnet mask, and host the same set, the default is 255.255.255.0 gateway mustIs the host IP, DNS if you set the host IP, if not the words of the Internet. To set the same DNS server and host! (This small,) (host dial-up, you can by IPCONFIG * ALL command to see the DNS server addresses, the Internet may not be the same each time)
- The DDR3 configuration Zeyang?
- Models of innovation which is now a good sound card?
- Maybe a AMDCPU, fetching water and do not know the good, the performance is how?
- Philips 193E1
- Optional 19-inch LCD
- Jiji Ji! Buy liquid crystal display (score sent)
- Jiji Ji! Yi Long 720
- E5300 overclocking
- 4000 first wife computer
- Ask the graphics card problem
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.