External power button to open the host automatically start flapper causes and solutions.

Users questions: My host computer is connected to the external plug power strip on. Yesterday, heavy equipment purchased from the PC market to the rain forest after wind GHostXP2 YN3.3 board installed in each time by an external power button (not by the host boot button) lights will automatically start the host, ask you heroes to means Point the causes and specific solutions. Thank you!
Experts answer: restart computer, press DEL to enter bios in the "INTEGRATEDPHRIPHERALSSETUP", there is a "PWRONAfterPWR-Fail" setting option. Its There are three options, namely, "On (Boot)", "Off (off)" and "Former-Sts (power restored to the pre-state)." You should set it to "Off". Press F10 save, is set up the computer will not automatically start up. If the above method does not work, you can continue Continued attempt the following modifications: the BIOS in "POWERMANAGENTSETUP" the "Restoreacpowerloss" set to "Disabled". The BIOS in the "POWERMANAGENTSETUP" of the "PM ControlbyAPM "set to" Yes ". Note that the individual is different BIOS versions, please refer to the specific motherboard manual.
  • This information provided by the users.Thanks!