How install the operating system?
Users questions:How install XP operating system? 7,777,771) Preferred press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) Select the CDROM6) Press ESC to return 7) the arrow keys to select Save & ExitSetup8) Enter and exit the way to retain parameter settings, you can drive to install the OS. Choose to install the operating system of lightDrive installation method, step 1), the system CD into the drive, restart the computer, use the arrow keys to highlight to move to CDROM2) when there PressanykeytobootfromCD, carriage returns, 3) a short, welcome to install the program interface screen appears, select Install Now. And backCar 4) shows 'license agreement' according to F8, the load of information 5) Select a clean install, 6) found that the system, select the system installed on this disk, and then use NTFS (quick) format the partition, formatted After the carriage return, to start the installation. 7) start copying files, this process longer and would need someTo 10 minutes of time, patience, etc., without intervention. After restarting the computer, 8) After restarting, loading equipment, procedures, this takes about 39 minutes of time without intervention, of which two are prompted to enter your user name, you can freely fill in, fill in your name such as . One set related toCan be set according to the prompts. After installation is complete reboot the system, this is a system shell, it is not a complete system. Next, install the appropriate drivers on the. One way to install the driver: random driver CD into the drive first. 1) Right 'My Computer' and select 'Properties '2) Select'Hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'Yes, only this time,' then click 'Next '6) Select' from the list or specified location (Advanced) 'and click Next 7) Select' Include this location in search ', Click 'Browse' / 8) found in the corresponding CD-ROM drive, click OK, click 'Next' / 9) to start the installation, completion, closure. Such an approach to each of the yellow question mark with both installed. System on the installation was successful. Method 2: Before the driver CD into the CD-ROM 1) Right 'of my powerBrain 'and select' Properties '2) select 'hardware' --- click 'Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select' Yes, only this time ', and click 'Next '6) started automatically search install the appropriate driver, complete closure, and then install the other yellowColor question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. Then used to start the installation software, install the software, the choice of installation directory is best not to select the installation disk in C