How to buy a new computer to install the operating system?
[Users questions | Browse:32 | Favorites]
Users questions:1) to the two systems are installed (an English board, a Chinese board), 2) would like to start their images on the screen for selection.
Experts answer: if two XP, installed in two different partitions on it. Both are installed, at boot time, will automatically have two XP's Start menuSingle, one is the Chinese one is in English. Preparation system tray, drive plate. Installation Method: 1) the first primary press the Del key to enter the BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) with the arrow keys to selectFirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' after the Enter key to restart the computer needsNote that, due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. Access to install 1) Restart your computer, use the arrow keys to highlightMove to the CDROM, then, the XP CD into the drive 2) when there PressanykeytobootfromCD immediately Enter 3) a short, welcome to install the program interface screen appears, select Install Now. And press Enter 4) shows the 'License Agreement' press F8, the load letterInterest at this time, but also to partition the hard drive. If the new computer has partition, and then on unnecessary points, if you want all the re-zoning, you can press to delete all partitions on all tips. Then again one by one to create a new partition. Partition in MB for the Unit .1 G = 1024MB, C drive to install the system, C drive partition is only10G or less adequate. Other partition can be divided according to the size of the disk. Partition after the completion of .5) to select a new installation of 6) Select the installation directory (usually choose C, the original system), then use NTFS (quick) format of this Division, (can also use other methods of FAT, it is recommended to use NTFS) formatted Enter to begin installation. When the second installation of the system to select the D partition or other .7) for copying files, this process takes a long, patient, etc., without intervention. After restarting the computer, 8) starts, load the equipment, procedures, without interference 9) The next step in accordance with instructions that you. Upon completion of resumption of such a system to complete the installation of complete system installation, first open the Control Panel Administrative Tools ** ** ** Computer Management Disk Management ** in the right bottom of the page, right click the partition is not formatted with FAT32 format, Note: Do not select Quick Format. because it is justPartition. Completion of each partition is formatted. And then install the driver of that. What does the installation of the driver? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question mark option, you need to install a few drivers. Method; before the driver CD into the CD-ROM1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'is just this a ', and click' Next 'and then select' Automatic search for installation 'and click' Next '* 6) Start automatically search install the appropriate driver, complete closure, and then install the other with a yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If there is no driver CD with the backup drive installed: 1) Right 'My Computer' and select'Attribute '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the (card) 4) Re-install the driver 5) Select 'Yes, only this time,' then click ' Next '6) Select 'from the list or specified location (Advanced)' and click Next 7) SelectOptional 'include this location in search', click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next' / 9) to start the installation, completion, closure is complete, then restart the machine in accordance with the above method to another system after installation. and then the broadband is installed, install antivirus softwareTo install patches, then install common software, such as: QQ, UC, office, etc.. If you are interested, click my name to see my personal information in my blog address, log on to my blog, which has a variety of system installation method, and other computer knowledge.
Experts answer: if two XP, installed in two different partitions on it. Both are installed, at boot time, will automatically have two XP's Start menuSingle, one is the Chinese one is in English. Preparation system tray, drive plate. Installation Method: 1) the first primary press the Del key to enter the BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) with the arrow keys to selectFirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' after the Enter key to restart the computer needsNote that, due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. Access to install 1) Restart your computer, use the arrow keys to highlightMove to the CDROM, then, the XP CD into the drive 2) when there PressanykeytobootfromCD immediately Enter 3) a short, welcome to install the program interface screen appears, select Install Now. And press Enter 4) shows the 'License Agreement' press F8, the load letterInterest at this time, but also to partition the hard drive. If the new computer has partition, and then on unnecessary points, if you want all the re-zoning, you can press to delete all partitions on all tips. Then again one by one to create a new partition. Partition in MB for the Unit .1 G = 1024MB, C drive to install the system, C drive partition is only10G or less adequate. Other partition can be divided according to the size of the disk. Partition after the completion of .5) to select a new installation of 6) Select the installation directory (usually choose C, the original system), then use NTFS (quick) format of this Division, (can also use other methods of FAT, it is recommended to use NTFS) formatted Enter to begin installation. When the second installation of the system to select the D partition or other .7) for copying files, this process takes a long, patient, etc., without intervention. After restarting the computer, 8) starts, load the equipment, procedures, without interference 9) The next step in accordance with instructions that you. Upon completion of resumption of such a system to complete the installation of complete system installation, first open the Control Panel Administrative Tools ** ** ** Computer Management Disk Management ** in the right bottom of the page, right click the partition is not formatted with FAT32 format, Note: Do not select Quick Format. because it is justPartition. Completion of each partition is formatted. And then install the driver of that. What does the installation of the driver? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question mark option, you need to install a few drivers. Method; before the driver CD into the CD-ROM1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'is just this a ', and click' Next 'and then select' Automatic search for installation 'and click' Next '* 6) Start automatically search install the appropriate driver, complete closure, and then install the other with a yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If there is no driver CD with the backup drive installed: 1) Right 'My Computer' and select'Attribute '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the (card) 4) Re-install the driver 5) Select 'Yes, only this time,' then click ' Next '6) Select 'from the list or specified location (Advanced)' and click Next 7) SelectOptional 'include this location in search', click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next' / 9) to start the installation, completion, closure is complete, then restart the machine in accordance with the above method to another system after installation. and then the broadband is installed, install antivirus softwareTo install patches, then install common software, such as: QQ, UC, office, etc.. If you are interested, click my name to see my personal information in my blog address, log on to my blog, which has a variety of system installation method, and other computer knowledge.
- What are the features the computer network?
- Describes the basic components of computer work
- How to determine your computer does not svchost trojan, how to delete
- Script virus malicious Web site how to do?
- Does the computer have universal health drive
- Fn key on a laptop how to use what is useful
- Help: This is a computer problem, how to repair?
- How to identify computer hardware is good or bad
- How to set double click to open shortcut icon?
- Internet system for personal use to restore it?
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.