How to maintain DVD burner?
[Users questions | Browse:32 | Favorites]
Users questions:
Experts answer: DVD burner to use the six Note DVD burner with laser head as the main components of the optical storage products, often using very easily lead to its aging and damage, eventually affecting their life. Therefore, maintenance of DVD burners is very important. Attention Recorder Dust, moisture dust and moisture are enemies of optical storage devices, dust falls on the laser components will affect the drive first-class performance, humid environment will drive the internal circuitry failure. First of all, to prevent dust from entering the drive landed on the shaved head. In place before the first CD-ROM necessary for cleaning, while minimizing the open Closed doors of the number of times, in order to avoid the chassis fan the air flows through absorption into the drive when the dust fell into the laser head. Now a lot of optical storage products designed with a full dust to ensure the normal drive to work to extend the life of the laser head. In addition, the wet environment will cause the internal drive connector Oxidation caused by poor contact of the fault, so to keep indoor humidity not too high. Do not ignore the heat burner DVD burner more power, burn relatively long time, so inevitably there will be a great heat, burner overheating will definitely affect the working conditions of the internal components. If the burn Bad cooling process, it may result Kepan failure, while in the life of the recorder will be reduced, especially during the hot summer months, this problem is more prominent. Therefore, DVD burner during use to avoid long continuous recording, the best complete a disk each time let the moment take a break recorder , And to facilitate the machine's normal cooling. Select good quality DVD disc if the disc burning poor quality, such as a physical disc scratches, pits, or point defects such as bubbles, then use this disc on the drive's error correction capability requires very high laser tube will become a great power, drive frequently in This error correction mode, of course, is not conducive to the laser life. DVD burner will also make difficult to identify CD-ROM, even if reluctantly engraved disc can not be good DVD player in general play. Do not frequent opening and closing doors of the depot as the disc spindle motor after the laser head and power are the biggest , So frequently out of position if it will speed up the natural aging of these components, so try to avoid frequent changers, who is often best to use the CD to copy it to your hard drive. Also, do not hand the doors of the disc tray forward, because it would drive the progress of * harmful to the mechanical parts out of warehouses, will Speed up the mechanical parts wear and aging, suggest the best use of the tray "into * the key" to close the doors. Play video games using a virtual drive to save disk space, a lot of games can be run directly on the CD. The drive reads the game disc is in full swing, and over time, which for a lot of drive within Mechanical components and laser components are at risk, it is proposed to use the virtual drive software, Virtual CD-ROM game disc made of play on the hard disk. Save the new DVD discs properly, or buy the DVD recording complete recording disk, if stored properly, are likely to disc deformation, damage and other bad dye layer Conditions, leading to poor read the disk, data loss. Therefore, only saved by the right way, we can extend the life of the disc, to ensure that important data safe. This includes a lot of attention, such as the CD-ROM disc storage rack or in a special CD box, do not put the temperature is high, in order to avoid high Temperature caused by disc deformation; to choose dry, dark place to store the disc, so to avoid light and moisture effects on the disc; Do not touch the disc with the chemical solution to avoid direct damage to the chemical reaction of CD-ROM; not direct contact with the disc surface lightly by hand, or on the disc to compression, bending; on Need to identify the disc, it is best not to use oil-based pen directly to disk write, and do not paste a note in the above, but should be on the CD in the CD case is identified. In addition, in order to avoid a hard object in the scratch, do not be put back immediately to CD storage boxes, in use should be careful not to come into contact with other Objects, and so on. Source: http: ** www.it.com.cn * f * edu * 053 * 20 * 89143.htm
Experts answer: DVD burner to use the six Note DVD burner with laser head as the main components of the optical storage products, often using very easily lead to its aging and damage, eventually affecting their life. Therefore, maintenance of DVD burners is very important. Attention Recorder Dust, moisture dust and moisture are enemies of optical storage devices, dust falls on the laser components will affect the drive first-class performance, humid environment will drive the internal circuitry failure. First of all, to prevent dust from entering the drive landed on the shaved head. In place before the first CD-ROM necessary for cleaning, while minimizing the open Closed doors of the number of times, in order to avoid the chassis fan the air flows through absorption into the drive when the dust fell into the laser head. Now a lot of optical storage products designed with a full dust to ensure the normal drive to work to extend the life of the laser head. In addition, the wet environment will cause the internal drive connector Oxidation caused by poor contact of the fault, so to keep indoor humidity not too high. Do not ignore the heat burner DVD burner more power, burn relatively long time, so inevitably there will be a great heat, burner overheating will definitely affect the working conditions of the internal components. If the burn Bad cooling process, it may result Kepan failure, while in the life of the recorder will be reduced, especially during the hot summer months, this problem is more prominent. Therefore, DVD burner during use to avoid long continuous recording, the best complete a disk each time let the moment take a break recorder , And to facilitate the machine's normal cooling. Select good quality DVD disc if the disc burning poor quality, such as a physical disc scratches, pits, or point defects such as bubbles, then use this disc on the drive's error correction capability requires very high laser tube will become a great power, drive frequently in This error correction mode, of course, is not conducive to the laser life. DVD burner will also make difficult to identify CD-ROM, even if reluctantly engraved disc can not be good DVD player in general play. Do not frequent opening and closing doors of the depot as the disc spindle motor after the laser head and power are the biggest , So frequently out of position if it will speed up the natural aging of these components, so try to avoid frequent changers, who is often best to use the CD to copy it to your hard drive. Also, do not hand the doors of the disc tray forward, because it would drive the progress of * harmful to the mechanical parts out of warehouses, will Speed up the mechanical parts wear and aging, suggest the best use of the tray "into * the key" to close the doors. Play video games using a virtual drive to save disk space, a lot of games can be run directly on the CD. The drive reads the game disc is in full swing, and over time, which for a lot of drive within Mechanical components and laser components are at risk, it is proposed to use the virtual drive software, Virtual CD-ROM game disc made of play on the hard disk. Save the new DVD discs properly, or buy the DVD recording complete recording disk, if stored properly, are likely to disc deformation, damage and other bad dye layer Conditions, leading to poor read the disk, data loss. Therefore, only saved by the right way, we can extend the life of the disc, to ensure that important data safe. This includes a lot of attention, such as the CD-ROM disc storage rack or in a special CD box, do not put the temperature is high, in order to avoid high Temperature caused by disc deformation; to choose dry, dark place to store the disc, so to avoid light and moisture effects on the disc; Do not touch the disc with the chemical solution to avoid direct damage to the chemical reaction of CD-ROM; not direct contact with the disc surface lightly by hand, or on the disc to compression, bending; on Need to identify the disc, it is best not to use oil-based pen directly to disk write, and do not paste a note in the above, but should be on the CD in the CD case is identified. In addition, in order to avoid a hard object in the scratch, do not be put back immediately to CD storage boxes, in use should be careful not to come into contact with other Objects, and so on. Source: http: ** www.it.com.cn * f * edu * 053 * 20 * 89143.htm
- How to configure the video card, so I am online
- Notebook keyboard with that key to restart the computer
- Memory burn you look what happens
- Today, how to buy A-DATA memory a computer will not start
- Laser mouse problem!
- Want to buy a motherboard tray out of the chassis can
- My motherboard for the memory it
- Is there knowledge of friends help me see it too how the host of the price and performance
- Take up too much computer memory?
- Download the new upgrade card driver, do not know what the path to the installation
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.