I installed vista install windowxp back into the system
[Users questions | Browse:50 | Favorites]
Users questions: I bought a new Lenovo laptop, installed the vista system, I feel good with, I would like to re-install windowxp systems
Experts answer: XP system you should install CD, right? Steps to xp. Steps: First, enter the BIOS to set CD-ROM drive priority. 1) First press Del key to enter BIOS, press F2 to enter notebook bios, different motherboards have different keys, see the specific instructions read screen prompts or 2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select the Fir stBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' after the Enter key, the computer automatically reboot the beginning Access to install 1) Restart your computer, quickly insert the XP CD-ROM drive, if at this time have missed the following step, again, you can start your computer 2) When the screen appears PressanykeytobootfromCD, immediately Enter 3) a moment, welcomed the installation screen appears Program Interface , Choose to install it now. And press Enter 4) shows the 'License Agreement' press F8 and then load the information at this time, we can partition the hard disk. The cursor transferred to C partition, press the D key to delete the C partition, press ENTER key, press the L key to confirm Delete C partition, then C partition performance as "not used" words. Then Press the C key to re-create the C partition on it. This C drive, there is no original system. If you want to re-partition the entire disk, you can delete all the partitions according to the above method, then re-create the partition. Partition to MB units .1 G = 1024MB, C drive to install the system, C drive partition is only 10G 'll Be enough. Such as to divide 10G, 10 1024 = 10240MB, in creating C partition, enter 10240 on it. Division entered the installation process is completed 5) Select a clean install 6) Select the installation directory (usually choose C, the original system), then use the NTFS (Fast) to format the partition (you can also use the FAT other methods, it is recommended to use NTFS) formatted Enter to begin installation. Installation process is simple, according to instructions that you, not to say, format the other disk after installation is complete, install the necessary driver and application software on it, to this change Installed XP system a success.
Experts answer: XP system you should install CD, right? Steps to xp. Steps: First, enter the BIOS to set CD-ROM drive priority. 1) First press Del key to enter BIOS, press F2 to enter notebook bios, different motherboards have different keys, see the specific instructions read screen prompts or 2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select the Fir stBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' after the Enter key, the computer automatically reboot the beginning Access to install 1) Restart your computer, quickly insert the XP CD-ROM drive, if at this time have missed the following step, again, you can start your computer 2) When the screen appears PressanykeytobootfromCD, immediately Enter 3) a moment, welcomed the installation screen appears Program Interface , Choose to install it now. And press Enter 4) shows the 'License Agreement' press F8 and then load the information at this time, we can partition the hard disk. The cursor transferred to C partition, press the D key to delete the C partition, press ENTER key, press the L key to confirm Delete C partition, then C partition performance as "not used" words. Then Press the C key to re-create the C partition on it. This C drive, there is no original system. If you want to re-partition the entire disk, you can delete all the partitions according to the above method, then re-create the partition. Partition to MB units .1 G = 1024MB, C drive to install the system, C drive partition is only 10G 'll Be enough. Such as to divide 10G, 10 1024 = 10240MB, in creating C partition, enter 10240 on it. Division entered the installation process is completed 5) Select a clean install 6) Select the installation directory (usually choose C, the original system), then use the NTFS (Fast) to format the partition (you can also use the FAT other methods, it is recommended to use NTFS) formatted Enter to begin installation. Installation process is simple, according to instructions that you, not to say, format the other disk after installation is complete, install the necessary driver and application software on it, to this change Installed XP system a success.
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.