Jiji Ji! Buy liquid crystal display (score sent)
Users questions: Monitor "Philips 190cw9" performance? ? Recent want to start it! Please experts who help out! Others say it is too bright, too dazzling! Is that true? ? "Samsung 943NW +" then? ? Experience confidential attention to it? Help it! Thank you pull! ^ _ ^
Experts answer: These two properties are based The same, but the contrast of 50,000:1 Samsung 943NW +, Philips 190cw9 for 12,000:1 (with a little contrast on the screen is brightest when the (white) with the most dark (black) the ratio of the brightness, high contrast means that the present relatively high brightness and bright colors Level. Samsung, which is used in dynamic contrast technology, the same general dynamic contrast ratio of LCD is the actual contrast ratio of 3-5 times. General this parameter is not significant when used) so the contrast between the two can be said that all the same. In addition they are black and white response time is the same as 5MS, brightness is 300cd, but a pity that Samsung 943NW + supports only VGA (analog) interface, while the Philips 190cw9 support for VGA and DVI (digital) interface (also with a USB interface, power supply for USB devices), although the use of the two interfaces do not see a business trip Different (as long as the difference between big screen high resolution can be seen), but the digital signal than analog right. Both the above are with CCFL backlight, power consumption is about 35W less. Buy now buy a LCD with LED backlight suggested, results in lower power consumption and performance of it. The price of the new out: fly Philips 193E1/860 parameters: screen size: 19 inches Whether widescreen: Yes Screen Ratio: 16:10 Viewing angle: 170 * 160 Backlight: LED backlight brightness: 250cd * Contrast Ratio: 1000000:1 Response time: 5ms Display Colors : 16.7M Best Resolution: 1440 900 interface type: D-Sub (VGA), DVI-D Plug and Play: Support Power consumption: 14.5W (Standby 1W) The price good, and the LED backlight , the power consumption of only 14.5W. You can set the brightness too bright Reduced, down to see comfortably can. Inspection should pay attention to the screen, and whether there are scratches or dust, do not let prototype cheated (that is, to others, to see the prototype).