Machine temperature contrast
Users questions: Machine into the same chassis temperature contrast two different configurations computers, a: CD3.06 + GA-915PD. Two: AMD3600 + * 2 + Onda N61S. Other configuration the same. First, the use of CPU temperature 25 degrees, turn the fan around 1500, the second is 60 degrees, Fan 3000 rpm, the question is why a low-temperature configuration, the heatsink and the motherboard is very hot, and even affect the power supplies are hot, the second configuration but feel normal? Temperature is seen in the BIOS, boot with Master Lu also measured, the same two measurements. Celeron D347 (775), 91 5 board is the kind of large plates, 30 * 24 that, bios set up in temperature to 120 degrees, you can double pci-e graphics card, previously at 70, then I clean up a little fan, added grease, temperature was only 30 or so, but there is hot radiator, the old configuration two temperature Will exceed the board set the maximum temperature of 75 and re-starting, but not very hot radiator.
Experts answer: Celeron D3463.06G not run at this temperature, notoriously high-frequency high-power low-energy ah. Minimum of 65 degrees, a temperature measuring device is certainly the motherboard is broken (25 degrees lower temperature than room temperature , This is impossible, right? ), The proposed overhaul the motherboard. Two normal.