Mobile hard disk problems, and ask
[Users questions | Browse:44 | Favorites]
Users questions:My mobile hard disk, connect your computer and always prompt "This USB interface is not recognized" (I use the time before a similar situation did not appear, are the system's own identification)? What is the reason, I have not had to replace a computer and systems. Mobile hard drive with a virus, or computer with a virus? Or IMobile hard disk bad?
Experts answer:1. Mobile hard disk box and hard disk connections, first of all please set the jumper the hard drive in the master position, methods can be found in the hard disk jumper legend. The first connection to connect an external power supply, hard disk, after normal work rotation to connect USB data cable. If the USB2.0 interface, noFrance identification, USB1.1 interface can be used normally, you can install the motherboard comes with USB2.0 drivers. 2. Mobile hard disk recommended that the computer's motherboard rear USB port connection, mobile hard disk USB interface on the computer front, while the front USB port generally use the extension cable connections,The on-board USB interface diverted to the front of the computer case, so the increased power consumption, so that the hard disk does not work, the system can not properly detect the correct name of the device or mobile hard disk box only to detect the device, they can not choose to install the driver , there may not be recognized. USB cable should be connectedTo the computer's USB port on the back while using the PS2 auxiliary power supply line, connected to the computer keyboard or mouse interface, for testing. PS2 interface to connect off of the state needs to connect, the computer starts to connect USB port. 3. If you are met at the nForce motherboardsThis problem, then you can install the latest nForce drivers and patch-specific USB2.0, the latest motherboard and operating system patch patch, or does not work, then try to refresh the motherboard's BIOS can be resolved in general. 4. WIN98 * ME when the next format with FDISKCan not correctly identify the capacity of mobile hard disk, in the next WIN2000 * XP can not format the hard disk formatted as a FAT32 file system. First Device Manager "Disk Drive" found under the removable hard disk, its "property can delete" option to not selected, restart the computer;Our driver is not installed by default when selected, but if you have used other USB devices may have changed this option selected. Since 2000, XP operating system does not support more than 30G of the FAT32 formatting, so if you want their format to 98 systems can beIts format. 98 system does not support large-capacity hard disk partition, so you have to it under WIN2000 or XP partition. 5. Access mobile hard disk, the computer did not respond. If the normal operation of connected USB hard disk, the computer does not display the mobile hard disk. Should check the "My PowerBrain * control panel * System * Device Manager, "if there are" Universal Serial Bus controllers "This one, if not the, you must restart the computer, and start holding down the Del key to enter CMOS settings, In the "CHIPSETFEATURESSETUP" or "INTEGRATEDPERIPHERALS "will" USBControl "set to" Enabled ", save and start your computer. Note: Due to the computer BIOS versions, the specific settings please refer to the computer attached to the motherboard manual. 6. Mobile hard disk in the win98 * winme, the driver is installed correctly, but no drive letter phenomena solution. Make sure the "Device Manager" USB mobile hard disk for the device is working correctly. If this works, enter "Device Manager" where the "disk drives", select the mobile hard disk, click "Properties" will "Settings "in" can delete "option ticked, restart your computer. 7. Before you start your computer access to removable hard disk, the computer will appear in the double letter, the contents of the same or can not be accessed. Because some of the motherboard BIOS support for USB in detection equipment in the access mobile hard disk, motherboards, BIOS detectionTo have access to USB devices, it automatically assigned device number; but the operating system starts, the system detects USB devices, USB plug-in equipment, re-load distribution device number, so the operating system in the double-letter phenomenon. Solution: The computer starts after the completion of access equipment. Because the computer aspects of aGeneral not be turned off this feature, but the USB product support hot swap function, you can operate the computer desktop access products occur. 8. Why in 2003, the connected mobile hard drive, can not find the drive letter. Mobile hard disk partition operating system is the need to manually specify the drive letter of the. You first determine the equipment installation isChang. (Mobile hard disk device is not working properly please refer to the instructions to install methods and precautions). You can in the "My Computer" on the right-click, in the event of the "Computer Management" window, select "Disk Management." In the lower right corner of the window, there should be "Disk 0" "Disk 1" (or more). The "Disk 1 "entry (should be your actual mobile hard disk), followed by long rectangular block is displayed as your mobile hard disk partition and the partition of the situation, but the district no letter. You only have to add each" drive. " blocks in the corresponding partition bar appears on the right-click drop-down menu, select the menu "to replace drive2.0 mobile hard drive, but the speed is and 1.1 same as mine. If it is 2.0 mobile hard drive, only the computer's USB port is 2.0, in order to play, if it is on the computer USB interface is 1.1, and he is also a transfer rate of 1.1 transmission. General 1.1Transfer rate in the 1M * S below, if more than 1M * S in general is the transmission speed of 2.0, with the computer configuration, the transmission speed is also different. If your computer motherboard's USB port is 2.0, please see Device Manager Universal Serial Bus controller driver is 2.0Experience, because the MO in the format will encounter the same problem. But it is worth reminding everyone that even if the number of common formatting the hard disk too much will decrease its life. 12. If the WIN95, and NT operating systems, use of mobile hard disk, you can use the following solution: In the WIN95
Experts answer:1. Mobile hard disk box and hard disk connections, first of all please set the jumper the hard drive in the master position, methods can be found in the hard disk jumper legend. The first connection to connect an external power supply, hard disk, after normal work rotation to connect USB data cable. If the USB2.0 interface, noFrance identification, USB1.1 interface can be used normally, you can install the motherboard comes with USB2.0 drivers. 2. Mobile hard disk recommended that the computer's motherboard rear USB port connection, mobile hard disk USB interface on the computer front, while the front USB port generally use the extension cable connections,The on-board USB interface diverted to the front of the computer case, so the increased power consumption, so that the hard disk does not work, the system can not properly detect the correct name of the device or mobile hard disk box only to detect the device, they can not choose to install the driver , there may not be recognized. USB cable should be connectedTo the computer's USB port on the back while using the PS2 auxiliary power supply line, connected to the computer keyboard or mouse interface, for testing. PS2 interface to connect off of the state needs to connect, the computer starts to connect USB port. 3. If you are met at the nForce motherboardsThis problem, then you can install the latest nForce drivers and patch-specific USB2.0, the latest motherboard and operating system patch patch, or does not work, then try to refresh the motherboard's BIOS can be resolved in general. 4. WIN98 * ME when the next format with FDISKCan not correctly identify the capacity of mobile hard disk, in the next WIN2000 * XP can not format the hard disk formatted as a FAT32 file system. First Device Manager "Disk Drive" found under the removable hard disk, its "property can delete" option to not selected, restart the computer;Our driver is not installed by default when selected, but if you have used other USB devices may have changed this option selected. Since 2000, XP operating system does not support more than 30G of the FAT32 formatting, so if you want their format to 98 systems can beIts format. 98 system does not support large-capacity hard disk partition, so you have to it under WIN2000 or XP partition. 5. Access mobile hard disk, the computer did not respond. If the normal operation of connected USB hard disk, the computer does not display the mobile hard disk. Should check the "My PowerBrain * control panel * System * Device Manager, "if there are" Universal Serial Bus controllers "This one, if not the, you must restart the computer, and start holding down the Del key to enter CMOS settings, In the "CHIPSETFEATURESSETUP" or "INTEGRATEDPERIPHERALS "will" USBControl "set to" Enabled ", save and start your computer. Note: Due to the computer BIOS versions, the specific settings please refer to the computer attached to the motherboard manual. 6. Mobile hard disk in the win98 * winme, the driver is installed correctly, but no drive letter phenomena solution. Make sure the "Device Manager" USB mobile hard disk for the device is working correctly. If this works, enter "Device Manager" where the "disk drives", select the mobile hard disk, click "Properties" will "Settings "in" can delete "option ticked, restart your computer. 7. Before you start your computer access to removable hard disk, the computer will appear in the double letter, the contents of the same or can not be accessed. Because some of the motherboard BIOS support for USB in detection equipment in the access mobile hard disk, motherboards, BIOS detectionTo have access to USB devices, it automatically assigned device number; but the operating system starts, the system detects USB devices, USB plug-in equipment, re-load distribution device number, so the operating system in the double-letter phenomenon. Solution: The computer starts after the completion of access equipment. Because the computer aspects of aGeneral not be turned off this feature, but the USB product support hot swap function, you can operate the computer desktop access products occur. 8. Why in 2003, the connected mobile hard drive, can not find the drive letter. Mobile hard disk partition operating system is the need to manually specify the drive letter of the. You first determine the equipment installation isChang. (Mobile hard disk device is not working properly please refer to the instructions to install methods and precautions). You can in the "My Computer" on the right-click, in the event of the "Computer Management" window, select "Disk Management." In the lower right corner of the window, there should be "Disk 0" "Disk 1" (or more). The "Disk 1 "entry (should be your actual mobile hard disk), followed by long rectangular block is displayed as your mobile hard disk partition and the partition of the situation, but the district no letter. You only have to add each" drive. " blocks in the corresponding partition bar appears on the right-click drop-down menu, select the menu "to replace drive2.0 mobile hard drive, but the speed is and 1.1 same as mine. If it is 2.0 mobile hard drive, only the computer's USB port is 2.0, in order to play, if it is on the computer USB interface is 1.1, and he is also a transfer rate of 1.1 transmission. General 1.1Transfer rate in the 1M * S below, if more than 1M * S in general is the transmission speed of 2.0, with the computer configuration, the transmission speed is also different. If your computer motherboard's USB port is 2.0, please see Device Manager Universal Serial Bus controller driver is 2.0Experience, because the MO in the format will encounter the same problem. But it is worth reminding everyone that even if the number of common formatting the hard disk too much will decrease its life. 12. If the WIN95, and NT operating systems, use of mobile hard disk, you can use the following solution: In the WIN95
- How to configure the video card, so I am online
- Notebook keyboard with that key to restart the computer
- Memory burn you look what happens
- Today, how to buy A-DATA memory a computer will not start
- Laser mouse problem!
- Want to buy a motherboard tray out of the chassis can
- My motherboard for the memory it
- Is there knowledge of friends help me see it too how the host of the price and performance
- Take up too much computer memory?
- Download the new upgrade card driver, do not know what the path to the installation
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.