PC and Apple's on-line problem
[Users questions | Browse:41 | Favorites]
Users questions:I have a windows2000 system, machine, may I ask how can set the Mac to connect to this machine! Thank you
Experts answer:Mac networking with Windows, the first five kinds of methods: DAVE use the software: DAVE & nbspfor & nbspMAC FitnessWith the environment: Mac & nbspOS & nbsp7.5 these advantages: simple operation, good stability. Little impact on the local system deficiencies: Installation troubles, each must use a separate serial number Mac Installation Method: PC-based fixed-TCP * IP address (such as 10.0.1.1 subnet mask: 255.255.255.0) set up working group, open the file sharing Mac, TCPIP is set to Ethernet and manually set the TCP * IP address (such as 10.0.1.2 subnet mask: 55.255.255.0), install the version of DAVE setting controls inside the NetBios, the Working Group and the PC version is set to the same setting controls inside Dave & nbspFileshare Note: NETBIOS settings in the second: PC & nbspMaclan use the software: PC & nbspMaclan7.x or 8.x forEnvironment: PC & nbspMaclan7.x (Windows9.x * me) PC & nbspMaclan8.x (Windows2000) Advantages: easy to install and operate Disadvantages: Change Windows9.x system, the system easy to collapse. AnAssembling Method: Windows Install PC & nbspMaclan, set up file sharing, Mac in the AppleTalk set to Ethernet. Note: After installing PC & nbspMaclan for system upgrades and changes in a certain caution. The third: MacSOHO software: MacSOHO1.0 for the environment: MacOS8.6 after Advantages: easy to install and operate, the corresponding Windows95 * 98 * 98SE * NT * ME * 2000. Disadvantages: not found installation method: After installation, set up step followed by aSeveral steps. Note: None fourth: Virtual & nbspPC use the software: Virtual & nbspPC3.0, 5.0 applies to the environment: only the Mac, but those who want to use Windows software, PowerMacG3 * G4 models advantages of the above: IIn the Powermac & nbspG4 * 400 machines installed on a Virtual & nbspPC3.0, so you can run on Windows, the Mac software. Zhuang Wan found faster than I expected much better. This can run the Mac side of the softParts, while running Windows, the software, copy and paste can be interoperable, but also drag and drop files with each other. 1. If you connect a MO, then Mac and Windows can read both formats, MO, when used simply to re-start the MO look on the list. 2. SetA total package, Mac and Windows swap files from each other. 3.Mac and Windows to share printers and an IP. 4. In Windows, you can see other networked Windows and Mac. 5. Virtual & nbspPC5.0 can be installed on multiple systems, each time at startup to choose from, and support a variety of screen resolution, very convenient. Disadvantages: a little trouble installing installation method: Virtual & nbspPC3.0 own Dos2000 system, so install the Virtual & nbspPC, Simply to install Windows95 or 98, look at readme change settings. Virtual & nbspPC5.0 can install DOS * windows3.1 * 95 * 98 * me ** NT * 2000 * XP * Linux and so on. Note: 1. Better to use more than PowerMacG3 * G4 models, the memory of 128 megabytes or more. 2. Please carefully read the Readme.txt before installing files, though it is in English, but many details are installed on the inside, do not look at it, it is possible to install Virtual EndPC, Xia Buqu will encounter the situation, like how to share the mouse, keyboard configuration, display and so on. Fifth: Use OSX10 directly connected to the use of Windows software: no need for any software environment: MacOSX10, corresponding to Windows9.x * Me * NT* 2000 * Unix advantages: easy to install and operate. Disadvantages: Only available from the Mac to find Widnows installation method: an example here to Windows2000. First, the menu from the finder in the "Mobile" and select "connect to server ...", then in the address bar lostInto the "smb: ** The full name of the computer name * total package name *", press "Connect." Logo & nbspin will pop a dialog box, and then enter Workgruop name, user name, password, and press "OK" can be. Enter the project is not wrong, then the total text of the specified server-sidePiece package will appear on your desktop. Note: looking for a total of Windows9.x * Me, a total of years of Chinese file name, file package will be garbled. However, in WindowsNT * 2000 * XP on both no problem. This problem can not be solved, and only in English has. Peer 443000200
Experts answer:Mac networking with Windows, the first five kinds of methods: DAVE use the software: DAVE & nbspfor & nbspMAC FitnessWith the environment: Mac & nbspOS & nbsp7.5 these advantages: simple operation, good stability. Little impact on the local system deficiencies: Installation troubles, each must use a separate serial number Mac Installation Method: PC-based fixed-TCP * IP address (such as 10.0.1.1 subnet mask: 255.255.255.0) set up working group, open the file sharing Mac, TCPIP is set to Ethernet and manually set the TCP * IP address (such as 10.0.1.2 subnet mask: 55.255.255.0), install the version of DAVE setting controls inside the NetBios, the Working Group and the PC version is set to the same setting controls inside Dave & nbspFileshare Note: NETBIOS settings in the second: PC & nbspMaclan use the software: PC & nbspMaclan7.x or 8.x forEnvironment: PC & nbspMaclan7.x (Windows9.x * me) PC & nbspMaclan8.x (Windows2000) Advantages: easy to install and operate Disadvantages: Change Windows9.x system, the system easy to collapse. AnAssembling Method: Windows Install PC & nbspMaclan, set up file sharing, Mac in the AppleTalk set to Ethernet. Note: After installing PC & nbspMaclan for system upgrades and changes in a certain caution. The third: MacSOHO software: MacSOHO1.0 for the environment: MacOS8.6 after Advantages: easy to install and operate, the corresponding Windows95 * 98 * 98SE * NT * ME * 2000. Disadvantages: not found installation method: After installation, set up step followed by aSeveral steps. Note: None fourth: Virtual & nbspPC use the software: Virtual & nbspPC3.0, 5.0 applies to the environment: only the Mac, but those who want to use Windows software, PowerMacG3 * G4 models advantages of the above: IIn the Powermac & nbspG4 * 400 machines installed on a Virtual & nbspPC3.0, so you can run on Windows, the Mac software. Zhuang Wan found faster than I expected much better. This can run the Mac side of the softParts, while running Windows, the software, copy and paste can be interoperable, but also drag and drop files with each other. 1. If you connect a MO, then Mac and Windows can read both formats, MO, when used simply to re-start the MO look on the list. 2. SetA total package, Mac and Windows swap files from each other. 3.Mac and Windows to share printers and an IP. 4. In Windows, you can see other networked Windows and Mac. 5. Virtual & nbspPC5.0 can be installed on multiple systems, each time at startup to choose from, and support a variety of screen resolution, very convenient. Disadvantages: a little trouble installing installation method: Virtual & nbspPC3.0 own Dos2000 system, so install the Virtual & nbspPC, Simply to install Windows95 or 98, look at readme change settings. Virtual & nbspPC5.0 can install DOS * windows3.1 * 95 * 98 * me ** NT * 2000 * XP * Linux and so on. Note: 1. Better to use more than PowerMacG3 * G4 models, the memory of 128 megabytes or more. 2. Please carefully read the Readme.txt before installing files, though it is in English, but many details are installed on the inside, do not look at it, it is possible to install Virtual EndPC, Xia Buqu will encounter the situation, like how to share the mouse, keyboard configuration, display and so on. Fifth: Use OSX10 directly connected to the use of Windows software: no need for any software environment: MacOSX10, corresponding to Windows9.x * Me * NT* 2000 * Unix advantages: easy to install and operate. Disadvantages: Only available from the Mac to find Widnows installation method: an example here to Windows2000. First, the menu from the finder in the "Mobile" and select "connect to server ...", then in the address bar lostInto the "smb: ** The full name of the computer name * total package name *", press "Connect." Logo & nbspin will pop a dialog box, and then enter Workgruop name, user name, password, and press "OK" can be. Enter the project is not wrong, then the total text of the specified server-sidePiece package will appear on your desktop. Note: looking for a total of Windows9.x * Me, a total of years of Chinese file name, file package will be garbled. However, in WindowsNT * 2000 * XP on both no problem. This problem can not be solved, and only in English has. Peer 443000200
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.