Partition on the hard disk
[Users questions | Browse:22 | Favorites]
Users questions: I am a WINXP system in my computer with C and D drive, each with 40 G, I would like more broken down into several partitions, how is the operation, my computer is a notebook
Experts answer: in the operating system, the partition can only points without the application's disk, if re-run district, will now magnetic Disk data loss caused by the system does not enter. If you want to re-partition, and you have 80G hard drive size, CD-ROM can use the system to re-partition and format. C drive only within can be a 10G, so the machine as you large hard drive, give it C partition to 10G. specific reload * Division * format, follow these steps: prepare the system CD, driver CD. First of all, enter the BIOS to set CD-ROM drive priority. 1) First press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS settings Interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' After the Enter key to restart the computer to note that due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. Access to install 1) restart electric Brain, the highlight using the arrow keys to move to the CDROM, then, the XP CD into the drive 2) when there PressanykeytobootfromCD immediately Enter 3) a short, welcome to install the program interface screen appears, select Install Now. And press Enter 4) shows the 'License Agreement Meeting 'after the press F8 to load the information at this time, you can re-partition the hard drive, first remove all partitions, then create a new partition and then click to MB as a unit, 1G = 1024MB, so if want C District, 10G, should be 10240MB, other hard disk partitions according to their own Size classification. C drive do not remember too much, the system boot from C drive first started, loading C after-hours, and then load the other disk, if the C partition too, will affect the system's boot speed of .5) and then choose clean install 6) Select the system installation directory (usually choose C,), then format it NTFS District, (can also use other methods of FAT, it is recommended to use NTFS) formatted carriage return, (other disks can be formatted before the installation is completed.) Because you re-partition, so do not recommend using NTFS (quick) or FAT (quick) method format. 7) start copying files, this too Process longer, patience, etc., without intervention. After restarting the computer, 8) starts, load the equipment, procedures, without interference 9) The next step according to the prompts. Upon completion of resumption of such a system on the installation completed the installation is complete,. Enter the system, right click on other disks, respectively, and with the FAT (Fast) format can be. Completed the driver installed to complete the installation of the system which driver do the installation? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question mark option, you need to install a few drivers. Method; before the driver CD into the CD-ROM 1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'is only This time 'and click' Next 'and then select' automatically search install 'and click' Next ' * 6) to start automatically search install the appropriate driver, complete closure, and then install the other with a yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If there is no driver CD with the backup drive installed: 1) Right 'My Computer' and Select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the (card) 4) Re-install the driver 5) Select 'Yes, only this time,' and then click 'Next '6) Select' from the list or specified location (Advanced) 'and click Next 7 ) Select 'Include this location in search', click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next' / 9) to start the installation, complete, close and then the broadband is installed, first Install antivirus software, install common software, such as: QQ, UC, office, etc. . Install the software need to download, double-click the downloaded file, follow the prompts to complete the operation, installation, pay attention to selecting the installation directory, do not select the C partition (choice tips, pay attention to tips). Installation system tutorial: http: ** strs.blogchina.com * 5454488.html If you are interested, you click on my name, see my blog address, there are various versions of the system installation.
Experts answer: in the operating system, the partition can only points without the application's disk, if re-run district, will now magnetic Disk data loss caused by the system does not enter. If you want to re-partition, and you have 80G hard drive size, CD-ROM can use the system to re-partition and format. C drive only within can be a 10G, so the machine as you large hard drive, give it C partition to 10G. specific reload * Division * format, follow these steps: prepare the system CD, driver CD. First of all, enter the BIOS to set CD-ROM drive priority. 1) First press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS settings Interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' After the Enter key to restart the computer to note that due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. Access to install 1) restart electric Brain, the highlight using the arrow keys to move to the CDROM, then, the XP CD into the drive 2) when there PressanykeytobootfromCD immediately Enter 3) a short, welcome to install the program interface screen appears, select Install Now. And press Enter 4) shows the 'License Agreement Meeting 'after the press F8 to load the information at this time, you can re-partition the hard drive, first remove all partitions, then create a new partition and then click to MB as a unit, 1G = 1024MB, so if want C District, 10G, should be 10240MB, other hard disk partitions according to their own Size classification. C drive do not remember too much, the system boot from C drive first started, loading C after-hours, and then load the other disk, if the C partition too, will affect the system's boot speed of .5) and then choose clean install 6) Select the system installation directory (usually choose C,), then format it NTFS District, (can also use other methods of FAT, it is recommended to use NTFS) formatted carriage return, (other disks can be formatted before the installation is completed.) Because you re-partition, so do not recommend using NTFS (quick) or FAT (quick) method format. 7) start copying files, this too Process longer, patience, etc., without intervention. After restarting the computer, 8) starts, load the equipment, procedures, without interference 9) The next step according to the prompts. Upon completion of resumption of such a system on the installation completed the installation is complete,. Enter the system, right click on other disks, respectively, and with the FAT (Fast) format can be. Completed the driver installed to complete the installation of the system which driver do the installation? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question mark option, you need to install a few drivers. Method; before the driver CD into the CD-ROM 1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'is only This time 'and click' Next 'and then select' automatically search install 'and click' Next ' * 6) to start automatically search install the appropriate driver, complete closure, and then install the other with a yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If there is no driver CD with the backup drive installed: 1) Right 'My Computer' and Select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the (card) 4) Re-install the driver 5) Select 'Yes, only this time,' and then click 'Next '6) Select' from the list or specified location (Advanced) 'and click Next 7 ) Select 'Include this location in search', click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next' / 9) to start the installation, complete, close and then the broadband is installed, first Install antivirus software, install common software, such as: QQ, UC, office, etc. . Install the software need to download, double-click the downloaded file, follow the prompts to complete the operation, installation, pay attention to selecting the installation directory, do not select the C partition (choice tips, pay attention to tips). Installation system tutorial: http: ** strs.blogchina.com * 5454488.html If you are interested, you click on my name, see my blog address, there are various versions of the system installation.
- What are the features the computer network?
- Describes the basic components of computer work
- How to determine your computer does not svchost trojan, how to delete
- Script virus malicious Web site how to do?
- Does the computer have universal health drive
- Fn key on a laptop how to use what is useful
- Help: This is a computer problem, how to repair?
- How to identify computer hardware is good or bad
- How to set double click to open shortcut icon?
- Internet system for personal use to restore it?
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.