Redo system problems!!
[Users questions | Browse:50 | Favorites]
Users questions:Which master taught me to redo the next system ah. Much detail as possible ah. I passed this Xianxie!
Experts answer: to buy a system that is installed on the system CD-ROM steps: first drive into the BIOS to set the priority. 1) First press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) Arrow keys to select Save & ExitSetup8) by 'Y' after the Enter key to restart the computer to note that due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2Enter the BIOS, set back much the same. Access to install 1) Restart your computer, use the arrow keys to move the highlight to the CDROM, then, the XP CD into the drive 2) when there PressanykeytobootfromCD immediately Enter 3) a moment, the screen appears HuanWelcome Setup screen, select Install Now. And press Enter 4) shows the 'License Agreement' press F8 and then load the information 5) Select a clean install 6) Select the installation directory (usually choose C, the original system), then use NTFS (quick) format the partition , (can also use other methods FAT, Proposed to use NTFS) formatted Enter to begin installation. 7) start copying files, this process takes a long, patient, etc., without intervention. After restarting the computer, 8) starts, load the equipment, procedures, without interference 9) The next step according to the prompts. So after restart, the installation of a systemThen completed the installation of a driver. What does the installation of the driver? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question mark option, you need to install a few drivers. Method; before the driver CD into the CD-ROM 1) Right 'My Computer' and select'Attribute '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'Yes, only this time' and click 'Next' Then select 'Automatic search for installation' and click 'Next' * 6) began to install the appropriate driver automatically searchProcedures done close, and then install the other with yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If there is no driver CD with the backup drive installed: 1) Right 'My Computer' and select 'Properties '2) Select' Hardware '-- Click 'Device Manager '3) Double-click the yellow question mark with the (card) 4) Re-install the driver 5) Select' Yes, only this time, 'then click' Next '6) Select 'from the list or specified location (Advanced) 'and click Next 7) Select' Include this location in search ', Click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next' / 9) to start the installation, completion, closure
Experts answer: to buy a system that is installed on the system CD-ROM steps: first drive into the BIOS to set the priority. 1) First press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) Arrow keys to select Save & ExitSetup8) by 'Y' after the Enter key to restart the computer to note that due to different BIOS, set the button after entering BIOS may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2Enter the BIOS, set back much the same. Access to install 1) Restart your computer, use the arrow keys to move the highlight to the CDROM, then, the XP CD into the drive 2) when there PressanykeytobootfromCD immediately Enter 3) a moment, the screen appears HuanWelcome Setup screen, select Install Now. And press Enter 4) shows the 'License Agreement' press F8 and then load the information 5) Select a clean install 6) Select the installation directory (usually choose C, the original system), then use NTFS (quick) format the partition , (can also use other methods FAT, Proposed to use NTFS) formatted Enter to begin installation. 7) start copying files, this process takes a long, patient, etc., without intervention. After restarting the computer, 8) starts, load the equipment, procedures, without interference 9) The next step according to the prompts. So after restart, the installation of a systemThen completed the installation of a driver. What does the installation of the driver? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question mark option, you need to install a few drivers. Method; before the driver CD into the CD-ROM 1) Right 'My Computer' and select'Attribute '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver 5) Select 'Yes, only this time' and click 'Next' Then select 'Automatic search for installation' and click 'Next' * 6) began to install the appropriate driver automatically searchProcedures done close, and then install the other with yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If there is no driver CD with the backup drive installed: 1) Right 'My Computer' and select 'Properties '2) Select' Hardware '-- Click 'Device Manager '3) Double-click the yellow question mark with the (card) 4) Re-install the driver 5) Select' Yes, only this time, 'then click' Next '6) Select 'from the list or specified location (Advanced) 'and click Next 7) Select' Include this location in search ', Click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next' / 9) to start the installation, completion, closure
- Attendance overtime clock
- Ask a new question master
- 230-volt power supply with the e5300 be enough?
- Lynnfield interface (front side bus, FSB) is the number?
- AMD Which products can compete with lynnfield * in the same grade?
- What is the biggest feature of Lynnfield?
- turboboost?
- Currently there are several processors Lynnfield?
- Microsoft.NETframework
- 640X480 pixels display settings, can not be changed
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.