Urgent! Consult the printer plus ink problem
[Users questions | Browse:36 | Favorites]
Users questions: I bought three colors of the color ink cartridge in the printer added, but do not know why only can play the out the yellow, red and blue are not playing, I ask how this is going on? How I should solve this problem ?
Experts answer: filling Precautions: 1. ink from the print head and overflow, with absorbent Suck the excess ink on paper can be had. 2. Cartridge print no water, because it begins within the uneven distribution of ink in the sponge, the cartridge put a couple of days, so the ink inside the sponge can be printed after distribution. To save costs and protect the environment, and now many users are trying to use the compatible ink for filling, the successful injection The key, of course Mexico is filled with choice of quality ink and science: First, fill the cartridge must be intact. To HP51626A cartridge, for example, if the bottom of the great resistance when refilling or Loumo phenomenon, indicating cartridge has been damaged, can not be used. Next, add ink to moderate, if the injection Excess ink will not only lead to Lou Mo, and spilled ink wet parts most likely to cause a short circuit while the injured machine. If you add too much ink, ink cartridges with a soft towel mop, and the print head, drain the excess ink. Also, avoid long exposure to ink dried up in the air and blocking. A fairly standard practice, ink cartridges About to kick down immediately after the ink refilling and refilling the machine immediately after printing, such as temporarily not be placed in the print head to protect Block (folder) inside the store, where a special rubber mats can block the air, to maintain long-term wet nozzle. If the cartridge nozzles dry and obstruction, suggested ways to improve the following: the print head portion (not Including the circuit board) immersed in warm water about 10 to 20 minutes to dissolve out dry and dye (in the process note that the circuit board must be kept dry), then the print head on a few soft tissue, so that of the nozzle residual water and ink dry, do not wipe the print head Shi Jin. A cartridge filled times The number of nozzles and sponge life under its influence: CanonBCI10/11/21 other cartridges, the use of ink filled tube will not hurt them inserted sponge, so the number may be more than filled with a needle filled BC01/02, BC05/06 other cartridges. HP series ink cartridges such as HP within the sponge's 51625A/649A, because after a few fills, its texture will change, should not be filled many times; and no sponge inside the cartridge, such as HP51626A/629A can be filled several times, such as the proper way up to 10 times or so.
Experts answer: filling Precautions: 1. ink from the print head and overflow, with absorbent Suck the excess ink on paper can be had. 2. Cartridge print no water, because it begins within the uneven distribution of ink in the sponge, the cartridge put a couple of days, so the ink inside the sponge can be printed after distribution. To save costs and protect the environment, and now many users are trying to use the compatible ink for filling, the successful injection The key, of course Mexico is filled with choice of quality ink and science: First, fill the cartridge must be intact. To HP51626A cartridge, for example, if the bottom of the great resistance when refilling or Loumo phenomenon, indicating cartridge has been damaged, can not be used. Next, add ink to moderate, if the injection Excess ink will not only lead to Lou Mo, and spilled ink wet parts most likely to cause a short circuit while the injured machine. If you add too much ink, ink cartridges with a soft towel mop, and the print head, drain the excess ink. Also, avoid long exposure to ink dried up in the air and blocking. A fairly standard practice, ink cartridges About to kick down immediately after the ink refilling and refilling the machine immediately after printing, such as temporarily not be placed in the print head to protect Block (folder) inside the store, where a special rubber mats can block the air, to maintain long-term wet nozzle. If the cartridge nozzles dry and obstruction, suggested ways to improve the following: the print head portion (not Including the circuit board) immersed in warm water about 10 to 20 minutes to dissolve out dry and dye (in the process note that the circuit board must be kept dry), then the print head on a few soft tissue, so that of the nozzle residual water and ink dry, do not wipe the print head Shi Jin. A cartridge filled times The number of nozzles and sponge life under its influence: CanonBCI10/11/21 other cartridges, the use of ink filled tube will not hurt them inserted sponge, so the number may be more than filled with a needle filled BC01/02, BC05/06 other cartridges. HP series ink cartridges such as HP within the sponge's 51625A/649A, because after a few fills, its texture will change, should not be filled many times; and no sponge inside the cartridge, such as HP51626A/629A can be filled several times, such as the proper way up to 10 times or so.
- That printer, you first think of the three brands are:
- What is the amount of ink drums? Do not know ah! !
- EPSON7800 appear dark green longitudinal horizontal stripes print how to do?
- Local area network printing problems
- After refilling cartridges really easy to use?
- Printer can not print continuous
- EPSON7800 what color printing using the configuration file is better?
- quickimagenavigator
- Why does my computer screen is always such a prompt?
- EPSON7800 use paper which is better?
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.