WINDOWS System reinstall problems
[Users questions | Browse:27 | Favorites]
Users questions:My computer infected by a virus, I would like to reinstall a system, but on the desktop click "Reinstall" does not work, there are other ways to re-install it? Please teach master detail.
Experts answer: Hello, your installation is not correct. Correct installation method is as follows: CD-ROM ready system, floodingCD-ROM can be fixed in accordance with the following methods if you do not have driver CD you should do first is to download a driver backup software, such as the Super Rabbit, driver wizard. Backup your PC drivers, back up to the non-system disk. (I shared in the Super Rabbit) installed steps: first to enter the BIOS settingSet drive priority. 1) First press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' after the Enter key to restart the computer to note that due to different BIOS, enter BIOS set up afterHome button may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. Access to install 1) Restart your computer, use the arrow keys to move the highlight to the CDROM, then, the XP CD into the drive 2) theIs PressanykeytobootfromCD, immediately Enter 3) a moment, welcome to setup screen appears, the interface, choose to install it now. And press Enter 4) shows the 'License Agreement' press F8 and then load the information 5) Select a clean install 6) Select the installation directory (usually selectedC, the original system), then use NTFS (quick) format the partition (you can also use the FAT other methods, it is recommended to use NTFS) formatted Enter to begin installation. 7) start copying files, this process takes a long, patient, etc., without intervention. After restarting the computer, 8) starts,Loading equipment procedures, without interference 9) The next step according to the prompts. Upon completion of resumption of such a system, then the installation completed the installation of a driver. What does the installation of the driver? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question markOption, you need to install a few drivers. Method; before the driver CD into the CD-ROM 1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver Procedure 5) Select 'Yes, only this time' and click'Next' and then select 'automatically search install' and click 'Next' * 6) to start automatically search install the appropriate driver, complete closure, and then install the other with a yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If you do not driveCD-ROM drive with a backup installation methods: 1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the (card) 4) reinstall drivers 5) Select 'Yes, only this time,' then click 'Next '6) electionSelect 'from a list or specified location (Advanced)' and click Next 7) Select 'Include this location in search', click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next step '/ 9) to start the installation, complete, close and then the broadband is installed, install antivirus softwareParts, patched to install common software, such as: QQ, UC, office, etc.. Installation system tutorial: http: ** strs.blogchina.com * 5454488.html
Experts answer: Hello, your installation is not correct. Correct installation method is as follows: CD-ROM ready system, floodingCD-ROM can be fixed in accordance with the following methods if you do not have driver CD you should do first is to download a driver backup software, such as the Super Rabbit, driver wizard. Backup your PC drivers, back up to the non-system disk. (I shared in the Super Rabbit) installed steps: first to enter the BIOS settingSet drive priority. 1) First press Del key to enter BIOS2) through the keyboard arrow keys to select AdvancedBIOSFeatures3) Enter into the BIOS setup interface 4) Use the arrow keys to select FirstBootDevice or (1stBootDevice) 5) use the up and down arrow keys to select CDROM6) Press ESC to return BIOS settings interface. 7) the arrow keys to select Save & ExitSetup8) Press 'Y' after the Enter key to restart the computer to note that due to different BIOS, enter BIOS set up afterHome button may also be different. If the desktop machine, in accordance with the above operation can be. If a laptop, you can press F2 to enter BIOS, set back much the same. Access to install 1) Restart your computer, use the arrow keys to move the highlight to the CDROM, then, the XP CD into the drive 2) theIs PressanykeytobootfromCD, immediately Enter 3) a moment, welcome to setup screen appears, the interface, choose to install it now. And press Enter 4) shows the 'License Agreement' press F8 and then load the information 5) Select a clean install 6) Select the installation directory (usually selectedC, the original system), then use NTFS (quick) format the partition (you can also use the FAT other methods, it is recommended to use NTFS) formatted Enter to begin installation. 7) start copying files, this process takes a long, patient, etc., without intervention. After restarting the computer, 8) starts,Loading equipment procedures, without interference 9) The next step according to the prompts. Upon completion of resumption of such a system, then the installation completed the installation of a driver. What does the installation of the driver? Right on my computer hardware ** ** ** attribute to open the Device Manager to see if there are several yellow question markOption, you need to install a few drivers. Method; before the driver CD into the CD-ROM 1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the 4) to re-install the driver Procedure 5) Select 'Yes, only this time' and click'Next' and then select 'automatically search install' and click 'Next' * 6) to start automatically search install the appropriate driver, complete closure, and then install the other with a yellow question mark option. When Device Manager no yellow question mark in the project, the system installed successfully. If you do not driveCD-ROM drive with a backup installation methods: 1) Right 'My Computer' and select 'Properties '2) select' hardware '--- click' Device Manager '3) Double-click the yellow question mark with the (card) 4) reinstall drivers 5) Select 'Yes, only this time,' then click 'Next '6) electionSelect 'from a list or specified location (Advanced)' and click Next 7) Select 'Include this location in search', click 'Browse' / 8) to find the corresponding backup drive, click OK, click 'Next step '/ 9) to start the installation, complete, close and then the broadband is installed, install antivirus softwareParts, patched to install common software, such as: QQ, UC, office, etc.. Installation system tutorial: http: ** strs.blogchina.com * 5454488.html
- operationsystemnotfound
- How to change XPGHOST CD inside the content?
- Blue screen problems
- WINDOWS permanently activated, you on behalf of genuine
- windows7 the img file to install
- What depth of XP, DOS installation method
- windows startup items in liunx
- EXCEL HYPERLINK function of depth in
- The problem with UltraISO installed windows7
- How to adjust the virtual memory
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.