Why do they always dropped?
[Users questions | Browse:51 | Favorites]
Users questions:Days of it, more than six months on the network suddenly extremely unstable and dropped on a few minutes and can not properly browse the web, play games, QQ also often at the landing in! Set break automatically redial, but Hao Fan, feeling the original Spacious flat, high-speed suddenly become bumpy village paths of! depressed ah! Ask expertWhat is the reason? A computer set up? (Never altered) 2 cards? (Used for several years, and lights flicker and normal) 3ADSL dial-up cat? 4-line problem? Five telecommunications problems? How to handle it? Extremely thanks!
Experts answer: to re-establish a "connection" to try. Release qospacket occupied 20% of the network bandwidth needs windowsxp built qospacket occupy 20% of the network bandwidth, but fortunately, we can "grouppolicy" to shut down the concrete steps are as follows: In the run type "gpedit.msc", Start the program, select computerconfiguration-administrativetemplates-network-qospacketscheduler, choose the right "limitreservablebandwidth ", is set to" enabled ", then" bandwidthlimit "set to" 0. "connection speed is low, but also often disconnected. cause of the problem and solution: A large reason for poor quality because of line, if the phone line qualityThe amount of poor, often broken, will seriously affect the browsing speed. Telephone line interference relatively large, such as the use of extensions, and telephone in parallel, using picture-machine, with anti-theft device of the phone, will affect the Modem connection. Sometimes, the performance of the computer port instability, when appropriately reduce the rate of serial port. Sometimes, the software methods used to solve (each site newspapers have mentioned before) the solution is: Click "Start Settings Control Panel modem" from the Modem select "Properties * page * Advanced Options link," Fill in additional settings "S10 = 50" and the "S25 =200 ", where the former can force Modem in a temporary loss of the carrier to maintain the connection status of five seconds, while the latter may force Modem in the DTR (DataTerminalReady, Data Terminal Ready) signal is invalid to keep 2 seconds instantaneous connection status, therebyLine transmission quality in order to avoid undesirable disconnection failure occurs when the Modem. I changed the root telephone lines, the telephone line directly connected to the MODEN, plus the "S10 = 50" and the "S25 = 200" parameter to solve the problem screen.width * 0.35) this.width=screen.width*0.40 *
Experts answer: to re-establish a "connection" to try. Release qospacket occupied 20% of the network bandwidth needs windowsxp built qospacket occupy 20% of the network bandwidth, but fortunately, we can "grouppolicy" to shut down the concrete steps are as follows: In the run type "gpedit.msc", Start the program, select computerconfiguration-administrativetemplates-network-qospacketscheduler, choose the right "limitreservablebandwidth ", is set to" enabled ", then" bandwidthlimit "set to" 0. "connection speed is low, but also often disconnected. cause of the problem and solution: A large reason for poor quality because of line, if the phone line qualityThe amount of poor, often broken, will seriously affect the browsing speed. Telephone line interference relatively large, such as the use of extensions, and telephone in parallel, using picture-machine, with anti-theft device of the phone, will affect the Modem connection. Sometimes, the performance of the computer port instability, when appropriately reduce the rate of serial port. Sometimes, the software methods used to solve (each site newspapers have mentioned before) the solution is: Click "Start Settings Control Panel modem" from the Modem select "Properties * page * Advanced Options link," Fill in additional settings "S10 = 50" and the "S25 =200 ", where the former can force Modem in a temporary loss of the carrier to maintain the connection status of five seconds, while the latter may force Modem in the DTR (DataTerminalReady, Data Terminal Ready) signal is invalid to keep 2 seconds instantaneous connection status, therebyLine transmission quality in order to avoid undesirable disconnection failure occurs when the Modem. I changed the root telephone lines, the telephone line directly connected to the MODEN, plus the "S10 = 50" and the "S25 = 200" parameter to solve the problem screen.width * 0.35) this.width=screen.width*0.40 *
- Which good-hearted people to help me apply for a serial number (a few questions on the line)
- How does this operate?
- Ruijie client authentication failure
- Local connections are always fork
- Home ADSL broadband Internet access problem
- How to set up remote control
- How 3G wireless network card to determine whether there is 3G coverage?
- "E pro-family" package problem
- Families how to achieve the fiber-optic broadband 2 computers can access the Internet?
- ADSL connection problem
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.