Why not Wi-Fi
Users questions: Wireless network card and wireless router is connected on the lower right corner with a sign but the point is connected to the connection-based ADSL connection is not on but it's not then I use the cable directly connected to the laptop has access to the Internet at this time and the wireless router or wireless card how things are connected in the end how can set the wireless AD SL Internet?
Experts answer: do not think so, run-ping ****** detect network links do not? I wish you success! Hope the following information to help you! Ping is the Windows series comes with an executable command. Use it to check whether the network connectivity, good use of it can be very good To help us determine the network fault analysis. Application format: PingIP address. This command can also add a number of parameters to use, specifically type Ping press Enter to see details. 1.Ping local IP such as the machine IP address: 172.168.200.2. The implementation of the Command Ping172.168.200.2. If the network card installation and configuration no problem, there should be similar to the following shows: Replayfrom172.168.200.2bytes = 32time 10msPingstatisticsfor 172.168.200.2PacketsSent=4Received=4Lost=00%lossApproximateroundtriptimesinmilli-secondsMinimum=0msM axiumu = 1msAverage = 0ms If the MS-DOS mode to perform this command displays the contents: Requesttimedout, is that a problem with network card installed or configured. Disconnect the network cable to perform this command again, if displayed properly, it indicates the machine to IP addresses may be used in another machine is using IP address repeated. If it still is not normal, it indicates that the local network card installed or a configuration problem, need to continue to check the relevant network configuration. 2.Ping Gateway IP Gateway IP is assumed: 172.168.6.1, then execute the command Pi ng172.168.6.1. In the MS-DOS mode to perform this command, if the display similar to the following information: Replyfrom172.168.6.1bytes = 32time = 9msTTL = 255Pingstatisticsfo r172.168.6.1PacketsSent=4Received=4Lost=0Approximateroundtriptimesinmilli-secondsMinimum=1msMaximum= 9msAverage = 5ms indicates that the LAN gateway router is running. On the contrary, it indicates a problem with the gateway. 3.Ping remote IP This command can detect whether the unit normal access Internet. Local telecom operators such as IP address is: 202 .102.48.141. MS-DOS mode in the command: Ping202.102.48.141, if the screen displays: Replyfrom202.102.48.141bytes = 32time = 33msTTL = 252 Replyfrom202.102.48.141bytes=32time=21msTTL=252Replyfrom202.102.48.141bytes=32time=5msTTL=252Replyfr om202.102.48.141bytes=32time=6msTTL=252Pingstatisticsfor202.102.48.141PacketsSent=4Received=4Lost=00 % LossApproximateroundtriptimesinmilli-secondsMinimum = 5msMaximum = 33msAverage = 16ms indicates normal operation, the normal access to the Internet. Otherwise , The Host file (windows * host) problems. ** PING command arguments detailed-a machine that identifies the target is converted to ip address-t if the user does not interrupt people will continue to ping requests go-ccount continuous ping command to send data packets