windowxp how to redo the system you? Network card, video card when installed?
[Users questions | Browse:18 | Favorites]
Users questions:The more detailed the better. Thank you a
Experts answer: network card, graphics card, the equipment installed before the system is necessary. Reinstallation steps: first, set the boot from the CD: the so-called CD-ROM boot, meaning that when the computer starts the first time in the drive, so if there is a CD-ROM drive boot functionCD-ROM can be read in time before the hard disk out (such as CD-ROM to install the system from the time). Set Method: 1. Start your computer and hold down the DEL key, until the BIOS Setup window (usually a blue background, yellow English words). 2. Select and enter the second,"BIOSSETUP" (BIOS settings). To find something that contains the text of the item or group of BOOT and find sequential "FIRST" "SECEND" "THIRD" three, representing the "first start", "Second Start" and "third start." HereWe are set according to the order of "drive" "floppy" "hard" to. (If this page does not see the text of the three E, usually the right side of the Options menu BOOT as "SETUP", then press Enter to enter you can see) should be "FIRST" hit the Enter key, in out Select sub-menuOptional CD-ROM. And press enter 3. Select a good start mode, press the F10 key, the text dialog box appears E, according to "Y" key (optional), and press Enter, the computer automatically restart, change the settings that came into effect. The second step, from the CD to install XP system before you reboot intoXP installation CD-ROM, CD appears in the bottom of the screen to see the words of the time, press the Enter key. KPS can be achieved, otherwise the computer begins to read the hard disk, that is, skip the KPS started from the hard drive. XP system disk KPS is a blue background after the installation interface, then the system will automatically analyze the computer information,Does not require any action until the display screen black look, followed by a blue background, Chinese language interface. Then there is the XP system, the first agreement, press F8 key (on behalf of consent to this Agreement), then see all the hard disk partition information list, and the instructions in Chinese. Select C drive,Press D key to delete the partition (recommended to delete all existing partitions, then re-partition the hard drive before the first useful to recall that the backup file), C drive location into a "no partition" and then in the original C drive location (ie " no partition "position) by C key to create a partition (delete all partitions after re-create the partition to do the sameKind of operation, until the hard disk sub-end), do not need to adjust the partition size. After the original C drive location into a "new unused" character, press the Enter key to continue. Next, format the partition possible options page, generally using "FAT32 formatted partition (fast)" (recommended to use NTFS format). Press Enter to continue. System to format C drive, very fast. After analyzing the hard drive formatted and former WINDOWS operating system, the same fast pace, followed by copying files, it takes approximately 8-13 minutes range (depending on machine configuration decisions). Copy files to complete (100%), the system will automatically restart, then when the CD-ROM ..... once again to see when, without pressing any key, let the system boot from the hard disk, because the part of the installation files have been copied to the hard disk a (Note: CD can not be removed at this time). A blue background color XP installation interface, the left to install the progress bar and remaining time display, a start value of 39 minutes, the decision is based on the configuration of the machine, usually P4, 2.4 installed on the machine is about 15 to 20 minutes. At this point until the installation is complete, the computer automatically restart, except for the serial number and the total inputComputer information (random fill, but most installation disks do not need to enter the serial number has been up), and knock 2 to 3 times a carriage return, the need to do any other operation. The system will automatically complete the installation. The third step is to install a driver. Restart, remove the disc, let the computer boot from the hard disk into theXP setup window. 2. Followed by "Next", "Skip", select "not registered", "Finish." 3. Into the XP desktop. 4. Right-click the desktop, choose "Properties", select "Display" tab, click the "Customize Desktop" item, check "MyComputer ", select" OK "to exit. 5. Back to the desktop, right-click" My Computer ", select" Properties ", select" Hardware "tab, select" Device Manager ", which is all the computer hardware management window, there is a world all in front of a yellow question mark + exclamation mark in the option represents the drive is not installed
Experts answer: network card, graphics card, the equipment installed before the system is necessary. Reinstallation steps: first, set the boot from the CD: the so-called CD-ROM boot, meaning that when the computer starts the first time in the drive, so if there is a CD-ROM drive boot functionCD-ROM can be read in time before the hard disk out (such as CD-ROM to install the system from the time). Set Method: 1. Start your computer and hold down the DEL key, until the BIOS Setup window (usually a blue background, yellow English words). 2. Select and enter the second,"BIOSSETUP" (BIOS settings). To find something that contains the text of the item or group of BOOT and find sequential "FIRST" "SECEND" "THIRD" three, representing the "first start", "Second Start" and "third start." HereWe are set according to the order of "drive" "floppy" "hard" to. (If this page does not see the text of the three E, usually the right side of the Options menu BOOT as "SETUP", then press Enter to enter you can see) should be "FIRST" hit the Enter key, in out Select sub-menuOptional CD-ROM. And press enter 3. Select a good start mode, press the F10 key, the text dialog box appears E, according to "Y" key (optional), and press Enter, the computer automatically restart, change the settings that came into effect. The second step, from the CD to install XP system before you reboot intoXP installation CD-ROM, CD appears in the bottom of the screen to see the words of the time, press the Enter key. KPS can be achieved, otherwise the computer begins to read the hard disk, that is, skip the KPS started from the hard drive. XP system disk KPS is a blue background after the installation interface, then the system will automatically analyze the computer information,Does not require any action until the display screen black look, followed by a blue background, Chinese language interface. Then there is the XP system, the first agreement, press F8 key (on behalf of consent to this Agreement), then see all the hard disk partition information list, and the instructions in Chinese. Select C drive,Press D key to delete the partition (recommended to delete all existing partitions, then re-partition the hard drive before the first useful to recall that the backup file), C drive location into a "no partition" and then in the original C drive location (ie " no partition "position) by C key to create a partition (delete all partitions after re-create the partition to do the sameKind of operation, until the hard disk sub-end), do not need to adjust the partition size. After the original C drive location into a "new unused" character, press the Enter key to continue. Next, format the partition possible options page, generally using "FAT32 formatted partition (fast)" (recommended to use NTFS format). Press Enter to continue. System to format C drive, very fast. After analyzing the hard drive formatted and former WINDOWS operating system, the same fast pace, followed by copying files, it takes approximately 8-13 minutes range (depending on machine configuration decisions). Copy files to complete (100%), the system will automatically restart, then when the CD-ROM ..... once again to see when, without pressing any key, let the system boot from the hard disk, because the part of the installation files have been copied to the hard disk a (Note: CD can not be removed at this time). A blue background color XP installation interface, the left to install the progress bar and remaining time display, a start value of 39 minutes, the decision is based on the configuration of the machine, usually P4, 2.4 installed on the machine is about 15 to 20 minutes. At this point until the installation is complete, the computer automatically restart, except for the serial number and the total inputComputer information (random fill, but most installation disks do not need to enter the serial number has been up), and knock 2 to 3 times a carriage return, the need to do any other operation. The system will automatically complete the installation. The third step is to install a driver. Restart, remove the disc, let the computer boot from the hard disk into theXP setup window. 2. Followed by "Next", "Skip", select "not registered", "Finish." 3. Into the XP desktop. 4. Right-click the desktop, choose "Properties", select "Display" tab, click the "Customize Desktop" item, check "MyComputer ", select" OK "to exit. 5. Back to the desktop, right-click" My Computer ", select" Properties ", select" Hardware "tab, select" Device Manager ", which is all the computer hardware management window, there is a world all in front of a yellow question mark + exclamation mark in the option represents the drive is not installed
- What are the features the computer network?
- Describes the basic components of computer work
- How to determine your computer does not svchost trojan, how to delete
- Script virus malicious Web site how to do?
- Does the computer have universal health drive
- Fn key on a laptop how to use what is useful
- Help: This is a computer problem, how to repair?
- How to identify computer hardware is good or bad
- How to set double click to open shortcut icon?
- Internet system for personal use to restore it?
- This information provided by the users.Thanks!
Computer Knowledge Copyright 2005-2015 All Rights Reserved.